Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Disco 2 : CDL won't disengage

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 151
Joined: Mon Mar 01, 2004 7:00 am
Location: Melbourne

Disco 2 : CDL won't disengage

Post by OnPatrol »

Hi there, I have the AMV CDL in my 2001 Disco2 V8. The Centre Diff Lock has remained locked after a quick jaunt in low range. I bypassed the CDL switch and I can hear the AMV motor running. Obviously there is power to the AMV CDL unit. Before I start ripping out the centre console it would be good to know if it is a fault in the AMV unit or the Landrover Centre Diff Lock. Anyone else had a similar problem?

Thanks.
Top
Posts: 3288
Joined: Sun Feb 02, 2003 10:15 pm
Location: Central West NSW

Contact:
Contact Slunnie

Post by Slunnie »

I haven't heard of the LandRover CDL breaking like that, but I have heard of the AMV units failing in mud.
Cheers
Slunnie

Discovery TD5, Landy IIa V8 ute.
Top
Posts: 151
Joined: Mon Mar 01, 2004 7:00 am
Location: Melbourne

Post by OnPatrol »

OK - I will assume that the LandRover CDL is OK, but if the AMV CDL motor still runs; will mud/dirt cause the AMV to fail at the link onto the LandRover CDL bolt?

By the way; once I remove the AMV CDL, which way is it to disengage (clockwise or anti-clockwise)?

thanks.
Top
Posts: 3288
Joined: Sun Feb 02, 2003 10:15 pm
Location: Central West NSW

Contact:
Contact Slunnie

Post by Slunnie »

Mate, to be honest I've never touched an AMV unit. As I understand it, it's based on a wiper unit or something like that.
Cheers
Slunnie

Discovery TD5, Landy IIa V8 ute.
Top
Posts: 113
Joined: Wed Mar 14, 2007 7:58 pm
Location: Canberra

Post by garrycol »

Is it simply that there is transmission windup so will not unlock - have you tried moving the control to the unlock position and driving backwards a little way to "unwind" the transmission.

Garry
Garry
Top
Posts: 151
Joined: Mon Mar 01, 2004 7:00 am
Location: Melbourne

Post by OnPatrol »

garrycol wrote:Is it simply that there is transmission windup so will not unlock - have you tried moving the control to the unlock position and driving backwards a little way to "unwind" the transmission.

Garry
Hi Garry, transmission wind up is not the problem. I went into limp home mode by removing the front prop shaft. I'm driving in 2WD at the moment.

My plan is to remove the centre console so that I can remove the AMV unit; then manually disengage the CDL and bolt in the front prop shaft; so it will be back to full time 4WD. I'll then see if I can get the AMV unit repaired or get another CDL that doesn't rely on electrical power.
Top
Posts: 3288
Joined: Sun Feb 02, 2003 10:15 pm
Location: Central West NSW

Contact:
Contact Slunnie

Post by Slunnie »

Most these days go to mechanical linkages. The general trend is towards the D2a lever and linkages for a factory finish and reliability.
Cheers
Slunnie

Discovery TD5, Landy IIa V8 ute.
Top
Posts: 101
Joined: Mon Dec 04, 2006 10:49 pm
Location: Gold Coast

Post by Petes »

It is possible for the CDL to fail locked. It happened to my brothers Disco1 and it terminally failed locked, requiring a complete rebuild of the centre diff
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 36 guests