Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

My new 80 series - please post pics of other 80s

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Posts: 1383
Joined: Tue May 06, 2008 8:12 pm
Location: Newcastle

Post by oldmate »

SHANE055 wrote:Have you done anything else like lengthen bump stops etc because my 35s just touch in the rear with 3in
Would depend on offset and tyre width. a 10.5 on stock offset probably wouldn't hit. something wider may hit the flair, or the lip of the guard.

shock length would also be a factor. most 4 inch shocks will bottem out before hitting the bumpstop. you are supposed to extend the bumpstops when running 4 inch or more shocks.
Posts: 335
Joined: Tue May 06, 2008 5:04 pm
Location: Brisbane Australia

Post by AngryElmo »

i have 3" lift 33" tyres with tube bars made by 2dextreme and sliders by him to, also have a rear wheel carrier, i will post sime pics up soon, there is many things u can do to ur car, but u need to look at what u want to do with it first. 3" i think is a good all round lift and 33 is good to, its big enough that u can do some awsome off roading but also sensiable enough for touring.
80 Series ute 4.5L,3" exhust, 4"lift , f&r air lockers, snorkel, duel batteries, 35"MTZ's, sliders,12000lbs winch, beer fridge and extra's
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest