Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Painting wheels ??

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 3073
Joined: Sun Jul 27, 2003 5:37 pm
Location: Mornington Peninsula, Victoria

Contact:
Contact bj42turbo

Painting wheels ??

Post by bj42turbo »

I have roh white powder coated wheels and what to change colour is there a paint that will go over powdercoat...........Dazz
Top
Posts: 2388
Joined: Sun Nov 24, 2002 10:20 pm
Location: bacabugari

Contact:
Contact big red

Post by big red »

use sandpaper then acrylic undercoat .
[url=http://bigred.redbubble.com/][color=red][b]You can follow me but its gunna hurt ![/b][/color][/url]
event pics http://bigred.redbubble.com/
Top
Posts: 2431
Joined: Thu Sep 04, 2003 12:02 pm
Location: Stayton, Oregon, USA

Post by SimplyPV »

ok truth is... now this is a secret..... what you want to do to prep urself to finally paint on a new coat.... use window cleaner of some sort, like windex or whatever, clean it up real good on all surfaces you plan to paint, rinse off with high pressure washer, then clean with laqure thinner (spelling?), rinse off, then clean again with window cleaner... this'll get all dirt/grim off and wont leave any blimishes underneath your coat of fresh paint. works a real treat!
[quote="simplypv"]its a Strine thing and i just dont understand![/quote]
Regards, PV
Team [size=134][color=red][i]Anti-[/i][/color][/size]Asshat [b][color=orange]#5[/color][/b]- Yank!
Top
Posts: 3073
Joined: Sun Jul 27, 2003 5:37 pm
Location: Mornington Peninsula, Victoria

Contact:
Contact bj42turbo

Post by bj42turbo »

cheers
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Mate got his professionally done $40 a rim, looks sweet too. But I didnt think it was that cheap...
Top
Posts: 29
Joined: Tue Mar 02, 2004 7:07 pm

Post by luxute »

Sand them really well with some 600 grit paper. Just before you paint them, give them a wipe over with some acrylic thinners. It helps the new paint bite in
Top
Posts: 2944
Joined: Tue Feb 11, 2003 5:47 pm
Location: Manjimup, Western Australia

Contact:
Contact ausyota

Post by ausyota »

I got mine painted by a local pannel beater for $40 a rim but I had to do the rubbing back.
He painted them in 2 pack black with a clear coat :cool: .
Paul.
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
Top
Posts: 398
Joined: Fri Oct 25, 2002 5:40 am
Location: near gosford,central coast, nsw

Post by cplux »

i got mine sandblasted for $80 all up and powdercoated gunmetal for around $15 a rim.
Top
Posts: 29
Joined: Tue Mar 02, 2004 7:07 pm

Post by luxute »

Getting them blasted and powdercoated would certainly be the best option. Paint doesn,t like to stick to powdercoating cause it is just like painting plastic. Once you start taking them offroad the paint will scratch off the powdercoating and look fairly average.
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

ausyota wrote:I got mine painted by a local pannel beater for $40 a rim but I had to do the rubbing back.
He painted them in 2 pack black with a clear coat :cool: .
Paul.


they look sweet too...
Top
Posts: 3076
Joined: Wed Nov 19, 2003 7:09 am
Location: web wheelin' from sydney

Post by stumped »

cplux wrote:i got mine sandblasted for $80 all up and powdercoated gunmetal for around $15 a rim.


where'd u get that done mate? CC somewhere, or syd, or newy?
___,,,,_('o')_,,,,____
part of the newy conspiracy...
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

or you could do like I did. I got a can of spray paint and painted over the rims. 6 years later all I do is touch it up every now and then :D

Overall cost for the 6 years about $20 as I use the $2.50 paint from Bunnings. It is fine as the car is used for 4wheeling and rims get scratched so why spend big bucks for something that will get scratched
Ransom note = demand + collage
Top
Posts: 3073
Joined: Sun Jul 27, 2003 5:37 pm
Location: Mornington Peninsula, Victoria

Contact:
Contact bj42turbo

Post by bj42turbo »

luxute wrote:Getting them blasted and powdercoated would certainly be the best option. Paint doesn,t like to stick to powdercoating cause it is just like painting plastic. Once you start taking them offroad the paint will scratch off the powdercoating and look fairly average.


Yeh thats what i was thinking and because they are still fairly new and paid more money for them because of the 16x7 inch size rather than the common variety 15x7.

Thanks for the advise guys
Top
Posts: 7954
Joined: Fri Sep 05, 2003 5:43 pm
Location: Tasmania

Post by DeWsE »

i got mine sandblasted for $80 all up and powdercoated gunmetal for around $15 a rim


If you think about it if you payed $55 per rim plus the above, then you could have afforded bling bling ally rims.

But we all know that steels are the best look ;)
[quote="STD CONSUMER"]haha, i'm tellin you, my camp was hard to find on Saturday night!
then i shared my bed with 2 second tom... [/quote]
Top
Posts: 398
Joined: Fri Oct 25, 2002 5:40 am
Location: near gosford,central coast, nsw

Post by cplux »

stumped wrote:
cplux wrote:i got mine sandblasted for $80 all up and powdercoated gunmetal for around $15 a rim.


where'd u get that done mate? CC somewhere, or syd, or newy?


local shop in gosford powdercoated and a guy up at somersby blasted em
Top
User avatar
A1
Posts: 3451
Joined: Tue Jan 28, 2003 8:57 pm
Location: NEWCASTLE

Post by A1 »

I got mine 2 packed in silver for the mav cost 50 bucks a rim speedy wheels brand new ...............but bout 2 weeks later they brought out silver speedy rims so if ya silver go and ask ya local speedy wheel dealer




Stumped b4 u ask i got it done ova on mitchell road cardiff industrial area at a local panel shop ;)



A1
[b][i] DAN [/i] [/b]


:silly:
Top
Posts: 251
Joined: Sat Mar 06, 2004 6:16 pm
Location: Melb. Victoria

Contact:
Contact savage

Post by savage »

grimbo wrote:
Overall cost for the 6 years about $20 as I use the $2.50 paint from Bunnings. It is fine as the car is used for 4wheeling and rims get scratched so why spend big bucks for something that will get scratched


now thats an idea.......

how do they actually come up however...
I Have a Hilux, Its nothing fancy, but it gives me plenty of fun!
Top
Posts: 3076
Joined: Wed Nov 19, 2003 7:09 am
Location: web wheelin' from sydney

Post by stumped »

A1MAV wrote:I got mine 2 packed in silver for the mav cost 50 bucks a rim speedy wheels brand new ...............but bout 2 weeks later they brought out silver speedy rims so if ya silver go and ask ya local speedy wheel dealer

Stumped b4 u ask i got it done ova on mitchell road cardiff industrial area at a local panel shop ;)


hahaha... thanks A1 :P i think i'll end up going the can of spraypaint for the special anti-bling look :armsup:
___,,,,_('o')_,,,,____
part of the newy conspiracy...
Top
Posts: 1513
Joined: Tue Oct 21, 2003 8:06 pm
Location: North East Melbourne

Post by ORSM45 »

savage wrote:
grimbo wrote:
Overall cost for the 6 years about $20 as I use the $2.50 paint from Bunnings. It is fine as the car is used for 4wheeling and rims get scratched so why spend big bucks for something that will get scratched


now thats an idea.......

how do they actually come up however...


my brothers done the same thing. lasts along time. he lashed out a bit with his new rims and bought 10 buck jet black chassis paint from autobarn. alot stronger and looks alot classy'er.

MaccA
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 4 guests