Hi guys, looking at buying a front diff assembly from a MQ troll. On the compliance plate, it has SD33 bla bla bla, he can't read the rest of the information.
I had the guy remove the inspection plate on the diff and he read "JH37:8 AM1120" of the crown wheel.
Just trying for find out what the ratio is. I need it to be a 4.6.
Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
MQ Diff Ratio
As per the 2nd "diff type" thread in the MQ/MK Bible, on the second page i found this.
http://www.outerlimits4x4.com/ftopic42944-0-asc-30.php
I rang nissan this morning and asked, but the fellow said that that number meant nothing, neither did the number stamped on my diff, the only way to know is count the teeth
http://www.outerlimits4x4.com/ftopic42944-0-asc-30.php
Spartacus wrote:alrighty i got this diff open and have found this combo:
JH 37:8 4 5 9
so does this mean its a 4.6?
I would then presume that my diff is also a 4.625:1?Patroldude wrote:Divide the 37 by the 8 = 4.625
Your right!m (none of this counting teeth crap.
Mk
I rang nissan this morning and asked, but the fellow said that that number meant nothing, neither did the number stamped on my diff, the only way to know is count the teeth
For any airbrush needs www.originalairgraphics.com.au
DA MAV' GONE http://www.outerlimits4x4.com/ftopic181799.php
DA MAV' GONE http://www.outerlimits4x4.com/ftopic181799.php
Who is online
Users browsing this forum: No registered users and 2 guests