Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

isuzu lift kit

Tech talk for GMH/Isuzu and Great Wall owners

Moderator: Moderators

Forum rules
Post Reply
Posts: 10
Joined: Thu May 15, 2003 9:33 pm

isuzu lift kit

Post by TFS55 »

5" inch isuzu suspension drop kit. made in thailand by Sun Suspension. will cost about 2,000 US$. this is without shipment.

Image

Image

Image

Image

Image

notice the design it doesnt bring the torsion bar down unlike the one made by ultimate suspensions for tritons and ford. also available for triton, ford, new rodeo. i think this can be fitted to any isuzu ifs suspension.
Top
Posts: 10
Joined: Thu May 15, 2003 9:33 pm

Post by TFS55 »

more pics.

Image

Image

Image

:P
Top
Posts: 139
Joined: Fri Feb 21, 2003 12:22 pm
Location: Sydney

Contact:
Contact tritonasuras

Post by tritonasuras »

got any pics of the triton one's ?????
DON'T USE ICE CREAM AS AMMUNITION
Top
Posts: 10
Joined: Thu May 15, 2003 9:33 pm

Post by TFS55 »

try this sites:

the triton is the strada.

http://www.4x4.in.th/mr/

http://www.weekendhobby.com/ad/sun.htm

btw i cannot understand the the words.
Top
Posts: 507
Joined: Tue Nov 26, 2002 6:32 pm
Location: Nannup, Western Australia

Post by Westoztroopa »

Not really convinced with the value of this kit. Certainly not going to get a huge improvement in front wheel travel. IMHO better off going for a combination of tyre, suspension and body lift to get the same result...

Still its good that they're doing this sort of stuff for the Isuzu aftermarket.

Noel
1992 3.2L V6 SWB Holden Jackaroo
2008 3.0L TD Holden Rodeo S/cab Trayback
Top
Posts: 40
Joined: Thu Nov 28, 2002 1:53 pm
Location: Geraldton, W.A.

Post by Steve »

Wouldn't it be cheaper to rip the front end out and put in a solid axle?
I'd rather have a sister in a whorehouse than a Toyota in the shed.
Top
Posts: 507
Joined: Tue Nov 26, 2002 6:32 pm
Location: Nannup, Western Australia

Post by Westoztroopa »

Depends if you were able to do it yourself but you would sure be better off in the long run.

Noel
1992 3.2L V6 SWB Holden Jackaroo
2008 3.0L TD Holden Rodeo S/cab Trayback
Top
Posts: 16
Joined: Mon Feb 02, 2004 3:49 pm

Post by leroy »

Looks like a lot of work and $$$. You would still end up with the same amount of wheel trave. Better off with a body lift and 33" tyres and crank the torsion bars a little.

Leroy
Top
Post Reply

Return to “Dmax / Isuzu / Holden / Great Wall”

Who is online

Users browsing this forum: No registered users and 9 guests