I'm not a mechanic so just looking for some advice! Went in some mud at Rover...sh*t stuff! Ever since then my rad and Auto trans are starting to badly overheat. Assume rad because of mud in fins etc...which I'll clean off. However am I right in saying that the Auto also has a cooling fins at the front of the vehicle and these could be caked also? Car is an 06 Patrol with 6.5 diesel chev in it and 4L80E transmission. Any pointers or other views would be great.
Thanks.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Overheating Radiator & Auto trans
Moderators: toaddog, TWISTY, V8Patrol, Moderators
on your gu should have your radiator (you know that much)thats good
infront of that should either be your air cond radiator or a transmission cooler
if its got factory air it will have air cond radiator
to check if its got remote transmission cooler,ly under car and follow your transmission lines,if they go into radiator then no you dont have remote transmission cooler
if the lines go into a seperate type radiator then u have a transmission cooler
the fins in the radiator dont take much to block,gunna be a pain cleaning it all out,best to take the whole lot out and give a proper clean as just simple hose wont remove it all
keep an eye on your temp guage when done as i would expect rebuilding a cooked 6.5 would not be cheap
infront of that should either be your air cond radiator or a transmission cooler
if its got factory air it will have air cond radiator
to check if its got remote transmission cooler,ly under car and follow your transmission lines,if they go into radiator then no you dont have remote transmission cooler
if the lines go into a seperate type radiator then u have a transmission cooler
the fins in the radiator dont take much to block,gunna be a pain cleaning it all out,best to take the whole lot out and give a proper clean as just simple hose wont remove it all
keep an eye on your temp guage when done as i would expect rebuilding a cooked 6.5 would not be cheap
Be CAREFUL with a water blaster as they can bend the fins of the rad (and trans cooler).
Take them (both) out, lay them flat and just use a std garden hose using the water just soaking off the mud as much as the water pressure. If you just karcher them in situ (still fitted to the car) you run the very real risk of bending the fins and THAT will cost you some serious money.
Hope this helps.
Take them (both) out, lay them flat and just use a std garden hose using the water just soaking off the mud as much as the water pressure. If you just karcher them in situ (still fitted to the car) you run the very real risk of bending the fins and THAT will cost you some serious money.
Hope this helps.
Big Dave, Scarborough, Qld
Loose Screws 4wd Racing Team
Loose Screws 4wd Racing Team
I agree with this, a slow soak over a long period is better even if it takes longer.bigbluemav wrote:Be CAREFUL with a water blaster as they can bend the fins of the rad (and trans cooler).
Take them (both) out, lay them flat and just use a std garden hose using the water just soaking off the mud as much as the water pressure. If you just karcher them in situ (still fitted to the car) you run the very real risk of bending the fins and THAT will cost you some serious money.
Hope this helps.
This is not legal advice.
Who is online
Users browsing this forum: No registered users and 137 guests