Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Toyota 1UZ-FE into 1993 GQ Patrol
Toyota 1UZ-FE into 1993 GQ Patrol
Here is some conversion shots
Over all shot
Over all shot
http://www.budscustoms.com.au
Like us and follow on facebook for up to date information of what we are working on and great random specials!
Custom Parts & Fabrication!
Ph: 0417 708 598
Like us and follow on facebook for up to date information of what we are working on and great random specials!
Custom Parts & Fabrication!
Ph: 0417 708 598
photo sort of shows the adaption
Last edited by bubs on Tue Aug 03, 2004 7:16 am, edited 1 time in total.
http://www.budscustoms.com.au
Like us and follow on facebook for up to date information of what we are working on and great random specials!
Custom Parts & Fabrication!
Ph: 0417 708 598
Like us and follow on facebook for up to date information of what we are working on and great random specials!
Custom Parts & Fabrication!
Ph: 0417 708 598
drivers side shot, plenty of length, the gearbox and transfer was moved forward 1", the rear drive shaft has enough spline to accomdate, the front shaft had to be shortened
http://www.budscustoms.com.au
Like us and follow on facebook for up to date information of what we are working on and great random specials!
Custom Parts & Fabrication!
Ph: 0417 708 598
Like us and follow on facebook for up to date information of what we are working on and great random specials!
Custom Parts & Fabrication!
Ph: 0417 708 598
top shot of drivers side, the steering box was spaced away from the frame 1", with solid spacers and longer bolts, it still uses the stock diesel patrol radiator, with a single 12" thermo between the radiator and the engine driven fan
uses wolf version 4 computer, 180kw, at the rear wheels in 4th gear at 160km/h on the dyno
uses wolf version 4 computer, 180kw, at the rear wheels in 4th gear at 160km/h on the dyno
http://www.budscustoms.com.au
Like us and follow on facebook for up to date information of what we are working on and great random specials!
Custom Parts & Fabrication!
Ph: 0417 708 598
Like us and follow on facebook for up to date information of what we are working on and great random specials!
Custom Parts & Fabrication!
Ph: 0417 708 598
this conversion has been running for 18 months now with only clutch problems but that has been sorted with a huge custom clutch on it now
http://www.budscustoms.com.au
Like us and follow on facebook for up to date information of what we are working on and great random specials!
Custom Parts & Fabrication!
Ph: 0417 708 598
Like us and follow on facebook for up to date information of what we are working on and great random specials!
Custom Parts & Fabrication!
Ph: 0417 708 598
turps wrote:You wouldnt want to have a dodgy engine mount. Would start hitting the heads and other bits on the engine bay.
I hope the VH45's arnt' this close.
There is plenty of room between the top of the motor and the bonnet
http://www.budscustoms.com.au
Like us and follow on facebook for up to date information of what we are working on and great random specials!
Custom Parts & Fabrication!
Ph: 0417 708 598
Like us and follow on facebook for up to date information of what we are working on and great random specials!
Custom Parts & Fabrication!
Ph: 0417 708 598
when you blow up your TD42 and are up for 8000 on a rebuild and you have a 1UZ-FE in the shed doing nothing, which has only done 60,000km, has double the power in stock form, has half the weight and only cost 6000 complete to swap including original purchase of the engine 2 yrs before, what would u do
http://www.budscustoms.com.au
Like us and follow on facebook for up to date information of what we are working on and great random specials!
Custom Parts & Fabrication!
Ph: 0417 708 598
Like us and follow on facebook for up to date information of what we are working on and great random specials!
Custom Parts & Fabrication!
Ph: 0417 708 598
spazbot wrote:ozy1 wrote:why would you put a toy Motor in a nissan, its like puttin a straight bloke in a gay bar!
good to see you under stand the toyota engine is the straight bloke and the nissan is a big gay bar
Get outta here you yota freak and go back to your gay section :bumsup:
[b][i] DAN [/i] [/b]
:silly:
:silly:
ozy1 wrote:why would you put a toy Motor in a nissan, its like puttin a straight bloke in a gay bar!
so you are saying a toyota driver is a straight bloke and a nissan is a gay bar?
WTF?
Hey, there has been a lot of conversion questions on V8 into patrols asked lately and Bubs is simply helping out, the pictures are very interesting and might throw some more ideas out, surely the sound of 180kw lighter and cheaper sounds good to some, regardless of who made the motor?!!
Another thing is the idea of a VH45 (Q45/Infiniti) conversion has come up a lot lately, this shows it can be done, it also shows the SIZE of the alloy Jap V8s, they are big, they are wide, they are tall. They are big block size, with the overhead cams, deep V and all the intake up on top.
Anyways, thanks bubs, I enjoyed the pictures, and I am sure they will come in handy for someone. Ignore the haters, they are probably jealous.
hands and mums dont count!!!
Has anyone fitted a Q45 / VH45 to a Patrol?
I am going to do an engine swap on a GU 3.0 and am tossing up whether to go the Infinity or 1UZFE route. The Q45 is fairly cheap now (Compared to when this thread was started) and the extra Torque looks good on paper but they are a damn big engine.
I want it to push 35's and I want it reliable.
Jimmy
I am going to do an engine swap on a GU 3.0 and am tossing up whether to go the Infinity or 1UZFE route. The Q45 is fairly cheap now (Compared to when this thread was started) and the extra Torque looks good on paper but they are a damn big engine.
I want it to push 35's and I want it reliable.
Jimmy
GU Patrol RB25 320+rwhp
Who is online
Users browsing this forum: No registered users and 2 guests