Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

1.0 timing

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 677
Joined: Sat May 14, 2005 7:22 pm
Location: Melbourne

1.0 timing

Post by foolsp33d »

replaced the timing belt on a 1.0 litre, and set the timing as per 1.3..
that being cyl 1 tdc, set cam/dizzy to number one, reassemble..pretty standard right?!?

Got home and thought id double check with both the outers mob and also see what the haynes :lol: had to say.. yet to check the FSM..

but in short the haynes says to go by cyl 4 at TDC?? is this odd or what?? Anyone with 1.0 litre experiance chime in and give shed some more light on what one to follow!?? workin with minimal tools, dont even have a plug spanner.. just a 17mm socket n ratchet, 10mm ringy and 12mm open ender :( SERIOUSLY LACKING IN TOOLS I KNOW :(
[quote="-Nemesis-"][quote="bj on roids"]whens the aussie one start?[/quote]

A few episodes before they can it? :lol:[/quote]
Top
Posts: 338
Joined: Wed May 23, 2007 6:11 pm
Location: Sydney

Contact:
Contact Buggerific

Post by Buggerific »

I havent done one but there should have been a timing mark on the crank and cam pulleys
Ozkor Auto Tech - 51 Orchard Road, Brookvale

1997 HZJ75 - 2" Springs, 33" MTZs, Touring Rig with more toys to come!
Top
Posts: 677
Joined: Sat May 14, 2005 7:22 pm
Location: Melbourne

Post by foolsp33d »

yeh about 3 different sets of marks :( freakin confuzing..
[quote="-Nemesis-"][quote="bj on roids"]whens the aussie one start?[/quote]

A few episodes before they can it? :lol:[/quote]
Top
Posts: 338
Joined: Wed May 23, 2007 6:11 pm
Location: Sydney

Contact:
Contact Buggerific

Post by Buggerific »

Well that does complicate matters then! Most cars I've done you set cyl 1 to tdc but ifthe manual says to set it at cyl 4 then I'd be inclined to follow it's instructions!
Ozkor Auto Tech - 51 Orchard Road, Brookvale

1997 HZJ75 - 2" Springs, 33" MTZs, Touring Rig with more toys to come!
Top
Posts: 677
Joined: Sat May 14, 2005 7:22 pm
Location: Melbourne

Post by foolsp33d »

I reread it and the nbr 4 cyl was for the dizzy reinstallation?... :oops:

the pic MIGHT help, see the SLIGHT mark nearest the alignment arrow.. thats where it aligns best to the nbr 1 cyl at tdc, and nbr 1 onthe dizzy...

Image
[quote="-Nemesis-"][quote="bj on roids"]whens the aussie one start?[/quote]

A few episodes before they can it? :lol:[/quote]
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 25 guests