Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Front Bearing seized onto Stub axle

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 6
Joined: Wed Dec 28, 2005 11:13 am
Location: Branxton

Front Bearing seized onto Stub axle

Post by thommo_97 »

I am replacing the Bearings on the front end of my gq and have found that the front bearing seems to be seized on to the stub axle on one side and I cannot get the hub off. any one got any ideas how to remove it. have tried a puller, etc.
Top
Posts: 579
Joined: Mon May 29, 2006 4:36 pm
Location: Melbourne

Post by bigcam »

undo the swivel seals and kingpins and remove the whole lot including the swivel housing, then get it in a press.

the stub will be rooted so see if you can find a whole replacement side from a wrecker and put your new bearing into that.
[quote="75 cruser"]we want more donkey[/quote]
Top
Posts: 2877
Joined: Mon May 10, 2004 9:46 pm
Location: Goodna QLD

Post by ludacris »

How often do you 4x4. Maybe the roller bearing is seized but not the inner or outer bearing to the axle. Have you missed undoing something. Maybe a circlip!

Cris
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
Top
Posts: 33
Joined: Thu Dec 25, 2008 5:51 pm
Location: mackay

Post by TempesT »

re-read what you said, does the hub still spin? Is the disk still on the hub?

Mine just needed to be cracked, crow bar to the ground between the disk and diff.
Top
Posts: 1443
Joined: Tue Apr 12, 2005 3:57 pm
Location: Brisbane

Post by vanbox »

My inner wheel bearing seized to the stub axle and with a bit of prying, the hub assembly came off leaving the bearing behind. I smashed the bearing then delicately cut the ring seized to the stub with a grinder.
MUD BEERS and MAYHEM

DURAMAX POWERED GU
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 0 guests