Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

i need a drive shaft made

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 450
Joined: Wed Jun 30, 2004 3:54 am
Location: richmond nsw

i need a drive shaft made

Post by tozook »

does any one know where or someone that i can get a patrol drive shaft modified or a new one around penrith area

i needs to be 300mm longer and fit a hilux flange to one end

any help would be great
Top
Posts: 20
Joined: Tue Jan 19, 2010 9:39 pm
Location: Townsville

Post by fjn00b »

i've used, not sure if Sydney is too far.

http://www.hardyspicer.com.au/branches_ ... entres.asp

great job, bit expensive[/url]
Top
Posts: 107
Joined: Tue Sep 09, 2008 10:14 pm
Location: THE SHIRE:BIRTH PLACE OF MODERN AUSTRALIA

Post by AUSDOG »

I had front and rear shafts custom'd for my sprung over cruiser by a bloke named Pieter, his work shop is in Turrella. Great service, knows what hes doing, no bullshit and pretty good price. Hope it helps. 9567 6247
Top
Posts: 245
Joined: Tue Mar 17, 2009 9:23 pm
Location: Sydney

Post by 4RUNNER_01 »

hey mate i had one made to length with new ends and slip joint from www.sydneydriveline.com/ they did a good job and were cheaper than any other place i called.
BOBBED 84' 4Runner 2.8L Chugger
35's, Locker's, High steer, RUF, 4 link rear, Crawler Gears.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 95 guests