Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
boys anyone knows the normal distance from axle to bump stop or the spring lenght (on the car)on a disco1 200tdi?
i fit new springs from bearmach and the nose looks a couple of cms higher than the rear and also leaning on one side (drivers side mine - passengers yours),the spring lenght is 31 on left front and rear and 29.4 on the right side front an rear.and the rear is also tooo soft and bounce a lot!
aaaaaaaa yea i fit them as said on the box,front went front and rears on the rear
did i mess trhe fronts with the rears or the guy who packed them for me!!?
fronts are also left and right springs check they are in the right way,as i can recall you can not put the rears in front visa versa as the spring seats are different
cheers kelvin
discothrasher wrote:fronts are also left and right springs check they are in the right way,as i can recall you can not put the rears in front visa versa as the spring seats are different
cheers kelvin
Incorrect, springs are all the same and will fit both front and rear, swap sides of the springs and check the free length of the front/ rear springs, fronts will be slightly shorter than rears.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
