Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

springs

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 601
Joined: Mon May 24, 2004 9:50 am
Location: south eastern melbourne

springs

Post by GUEEY »

As above.

Do GU/GQ Coils fit into 100 series cruisers.
I have good HD Dobbinson Coils in my GQ , i was wondering is they fit a 100.
I dont think so but its worth asking!!

Grant.
Last edited by GUEEY on Tue Feb 09, 2010 7:28 pm, edited 1 time in total.
Top
Posts: 1768
Joined: Sun Mar 14, 2004 11:51 am
Location: Weipa

Post by crankycruiser »

nope.

rears may go close, but fronts are way different
80 xtra cab
Supercharged LS1, Locked n shit

80 Wagon, TD Tourer, locked, Interco 35s, G turbo
Top
Posts: 337
Joined: Wed May 21, 2008 3:47 pm
Location: Birkett Place sth geelong

Contact:
Contact Auto-Craft

Post by Auto-Craft »

Rears wont work, closed coil vs blunt end, fronts will fit, but car will sit aprox 25mm lower than patrol, and the spiggott size on the diff is aprox 8mm smaller, so may "rattle" on the seat.

You will also need a flat ground top on the coil to make it work, vs patrol blunt end, otherwise the weight is being applied to a very small contact patch, which can crack the top spring mount on the live axle 105.
Supercharged 80 SOLD - "OPERATION SANDY" now in effect.
Top
Posts: 1119
Joined: Wed Apr 14, 2004 10:03 am
Location: Melbourne, looking at the hills for snow

Re: GQ/GU Coils in 100 series

Post by LOCKEE »

GUEEY wrote:As above.

Do GU/GQ Coils fit into 100 series cruisers.
I have good HD Dobbinson Coils in my GQ , i was wondering is they fit a 100.
I dont think so but its worth asking!!

Grant.
Can supply new coils Grant, with the larger wheel openings, you can run left lift than a Datsun also.
:rofl: :popcorn: :snipersmile:
Top
Posts: 601
Joined: Mon May 24, 2004 9:50 am
Location: south eastern melbourne

Re: GQ/GU Coils in 100 series

Post by GUEEY »

LOCKEE wrote:
GUEEY wrote:As above.

Do GU/GQ Coils fit into 100 series cruisers.
I have good HD Dobbinson Coils in my GQ , i was wondering is they fit a 100.
I dont think so but its worth asking!!

Grant.
Can supply new coils Grant, with the larger wheel openings, you can run left lift than a Datsun also.
Thanks Lockee, only want to run 305/70s on the 100, what lift would i need???

Grant.
GU III TD42T UFI18G Cross Country IC, 20 PSI. Neeeeeed mooooore Fueeeeeel.
Top
Posts: 1119
Joined: Wed Apr 14, 2004 10:03 am
Location: Melbourne, looking at the hills for snow

Post by LOCKEE »

2 inch is all that is needed.
:rofl: :popcorn: :snipersmile:
Top
Posts: 601
Joined: Mon May 24, 2004 9:50 am
Location: south eastern melbourne

Post by GUEEY »

LOCKEE wrote:2 inch is all that is needed.
whats 4 coils for a 100 worth these days.
GU III TD42T UFI18G Cross Country IC, 20 PSI. Neeeeeed mooooore Fueeeeeel.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 84 guests