have a 90 model 80 series, it has a fridge centre console that is not connected. I was wondering if anyone knew anything about the wiring setup, there are 3 wires that run into a plug and need to be run somewhere, and thats what i need to know, i assume there will be an earth, a 12v+ and maybe a signal wire to run to the ac compressor and or solenoid. Could someone please have a look in their non-australian 80 series workshop manual wiring diagram or whatever.
I plan on cutting into the high and low pressure lines of the aircon system, placing tee's into the lines, and a solenoid on the high pressure side. what i need to know is what wire tells the solenoid and ac compressor to open or turn on respectively.
The fridge console unit has two ice trays inside, with "off" , "ICE" and "cool" buttons on the top. Underneath the console is a control unit known as an amplifier.
What boggles my mind is that the fridge console has a fan, a thermistor to control the temp in the fridge, 3 settings being off ice and cool, a amplifier, probably 20 wires come out of the amplifier. how can the system be so complex and have only 3 wires that need to be plugged in?
help please!
cheers,
todd
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
need help with fridge centre console
Moderators: toaddog, Elmo, DUDELUX
Who is online
Users browsing this forum: No registered users and 75 guests