60 SERIES shocks that actually fit WTF

[blow60]

gday just wondering where to get shockers to suit 3-4" inch lift i wanted rancho 9000x but i rang mob in nsw and they reckon they didn't have a listing for anything other than 2" doesn't help much i'm in process of moddifing rear shock mounts (kit from snake racing for inverted shocks) springs are shit hot shocks are good for now then trying to fit ginormus shcakles that was a fail any help would be awesome ... sir flex-a-lot

[OIIIO]

If you want Rancho's, jump onto the 4WD1 website.
They have all the specs for Rancho in a chart.
Just measure your extended and compressed lengths.
Make sure you check the mounting style. (ring, pin etc... sorry don't know cruisers)
If in doubt call them before ordering.
I've run Rancho 9000XL's for a couple of years now, from 4WD1 and I reckon they're a great shock for the $$$ and you can get them in just about any size...

[rock hopper]

i have a 6'' lift in my hj60 .. and still use std mounts ... and just matched up a kit to suit ...
if u send me your max length .. i will find u a part number that will work ..

[blow60]

gday just wondering how do you measure max lenth of spring i guess remove shocker and jack up yay or nay also how di you get 6 inch lift

[Wozza244]

Hmmm, ive been there and done it, you dont need 6" lifts in a 60 but it looks good.

Go out in the field and flex it up as hard as it will go and measure the compressed and relaxed lengths.

Jacking it up wont give you a true measurement.