Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

2inch lift enough for 35's?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Posts: 91
Joined: Wed Dec 30, 2009 10:42 pm
Location: queensland

Post by surfute »

berad wrote:Just Extend the bumpstops, so the tyres won't come to the top of the guard ettc.
ok. and that would also limt my flex upwards.
would 33 have no scrubbing with a 2inch lift ?
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

surfute wrote:
RAY185 wrote:
surfute wrote:
RAY185 wrote:I don't see why you guys are talking about moving the front diff forward to clear 35s. A 35 will still be miles away from fitting the back of the guard or firewall. The biggest problem you'll deal with as mentioned is the standard 40 drag link (until you convert to 60 power steer) and hitting the bottom of the guard on compression. As said, adjusting bump stops will fix that.

well from what i was getting from the others that moving the diff forward would help to stop the 35s scrubbing on the guard with only a 2inch lift.
If anything, it will make it worse as if you have a look at a 40 series front guard, it tapers down at the front. While you're there, sight up where your wheel is currently sitting and see how far it is from the firewall/rear of guard. There are benefits to extending your wheebase but clearing 35s without a bodylift is not one of them.
so if i wanted to run 35's id have a 2inch spring lift and then a body lift of some sort?
While thats not really what I said, it is probably the ideal way to do it if you don't want to limit your suspension travel.

What I was simply saying is that the position of the front axle does not need to be moved forward to clear 35s, if anything it will make it more of a problem with the downward slope of the front of the guard. There is miles of room to the rear of the guard anyway so no need to go frward unless you want to increase wheel base for other reasons.

You will have 2 problems with 35s.

1: You will need to limit your turning circle (by adjusting your steering stops) to stop the tyre hitting the stock 40 drag link (unless you swap to 60 steering or big offset rims). A body lift will not change this.

2: You will need to significantly lower your bump stops to limit your up travel or you will mince your guards if you have any sort of flex. A body lift will reduce your need to limit down travel by lowering bump trops or negate the need entirely...again, depending on how much flex you have.

I'm not a huge fan of body lifts even though I have one. My best advice to you is to put the tyres on with whatever spring lift you intended and see how close it comes to hitting when flexed. Then decide if you want to adjust your bump stops or do a body lift or a combination of the 2.
Posts: 91
Joined: Wed Dec 30, 2009 10:42 pm
Location: queensland

Post by surfute »

RAY185 wrote:
surfute wrote:
RAY185 wrote:
surfute wrote:
RAY185 wrote:I don't see why you guys are talking about moving the front diff forward to clear 35s. A 35 will still be miles away from fitting the back of the guard or firewall. The biggest problem you'll deal with as mentioned is the standard 40 drag link (until you convert to 60 power steer) and hitting the bottom of the guard on compression. As said, adjusting bump stops will fix that.

well from what i was getting from the others that moving the diff forward would help to stop the 35s scrubbing on the guard with only a 2inch lift.
If anything, it will make it worse as if you have a look at a 40 series front guard, it tapers down at the front. While you're there, sight up where your wheel is currently sitting and see how far it is from the firewall/rear of guard. There are benefits to extending your wheebase but clearing 35s without a bodylift is not one of them.
so if i wanted to run 35's id have a 2inch spring lift and then a body lift of some sort?
While thats not really what I said, it is probably the ideal way to do it if you don't want to limit your suspension travel.

What I was simply saying is that the position of the front axle does not need to be moved forward to clear 35s, if anything it will make it more of a problem with the downward slope of the front of the guard. There is miles of room to the rear of the guard anyway so no need to go frward unless you want to increase wheel base for other reasons.

You will have 2 problems with 35s.

1: You will need to limit your turning circle (by adjusting your steering stops) to stop the tyre hitting the stock 40 drag link (unless you swap to 60 steering or big offset rims). A body lift will not change this.

2: You will need to significantly lower your bump stops to limit your up travel or you will mince your guards if you have any sort of flex. A body lift will reduce your need to limit down travel by lowering bump trops or negate the need entirely...again, depending on how much flex you have.

I'm not a huge fan of body lifts even though I have one. My best advice to you is to put the tyres on with whatever spring lift you intended and see how close it comes to hitting when flexed. Then decide if you want to adjust your bump stops or do a body lift or a combination of the 2.

yea i dont really want to do a body lift either.
its going to get a 60's steering upgrade.
im starting to think 33's would be better with just a 2inch spring lift
Twisted by Design
Posts: 2607
Joined: Tue Jul 15, 2003 12:52 pm
Location: Sunshine Coast QLD

Post by TWISTY »

My 40 runs a 4" susp lift and extended shackles. My bumpstops are spaced down 3" to stop the 35s rubbing. Had to trim my fronts guards too, as the 35s rubbed bad on them when I moved the front axle forward 1.5".
2012 FJ Cruiser
1984 BJ42 - Stretched and Coilovered
1977 HJ45
Posts: 91
Joined: Wed Dec 30, 2009 10:42 pm
Location: queensland

Post by surfute »

TWISTY wrote:My 40 runs a 4" susp lift and extended shackles. My bumpstops are spaced down 3" to stop the 35s rubbing. Had to trim my fronts guards too, as the 35s rubbed bad on them when I moved the front axle forward 1.5".
hmm might just go the 33's.
only asking cuase i found some cheap good nick 35's

so they wouldnt fit with out scrubbing on a 2inch lift
Posts: 305
Joined: Thu Oct 13, 2005 5:40 am
Location: mackay

Post by mick80 »

that was painful :x
cheers mick
Posts: 160
Joined: Tue Dec 22, 2009 4:41 pm
Location: ...

Post by tufflux88 »

if i were you id stick to the tyres you have now for a while until you learn some more about forbying and setups.
not cutting into you but if you get 35s they might take you places beyond your driving capability and get you into ALOT of trouble
i ran 31's for the first few trips when i got my lux then i borrowed some 33's for a few months and then went onto 35s after id learnt a fair bit about my car,how it works,suspension mods,diy stuff and what i wanted to achieve

what do you want to achive by running 35s?
Posts: 91
Joined: Wed Dec 30, 2009 10:42 pm
Location: queensland

Post by surfute »

tufflux88 wrote:if i were you id stick to the tyres you have now for a while until you learn some more about forbying and setups.
not cutting into you but if you get 35s they might take you places beyond your driving capability and get you into ALOT of trouble
i ran 31's for the first few trips when i got my lux then i borrowed some 33's for a few months and then went onto 35s after id learnt a fair bit about my car,how it works,suspension mods,diy stuff and what i wanted to achieve

what do you want to achive by running 35s?
the tyres on it now are worn out 32 all terrains
so i think the 33 should be right.

i thought if i ran 35's id be able to get to the harder,better places
with a more diff clerance.
Posts: 91
Joined: Wed Dec 30, 2009 10:42 pm
Location: queensland

Post by surfute »

would 33's fit with no lift ?
Posts: 305
Joined: Thu Oct 13, 2005 5:40 am
Location: mackay

Post by mick80 »

tufflux88 wrote:if i were you id stick to the tyres you have now for a while until you learn some more about forbying and setups.
not cutting into you but if you get 35s they might take you places beyond your driving capability and get you into ALOT of trouble
i ran 31's for the first few trips when i got my lux then i borrowed some 33's for a few months and then went onto 35s after id learnt a fair bit about my car,how it works,suspension mods,diy stuff and what i wanted to achieve

what do you want to achive by running 35s?
best advice lad follow it.
cheers mick
Posts: 305
Joined: Thu Oct 13, 2005 5:40 am
Location: mackay

Post by mick80 »

surfute wrote:
tufflux88 wrote:if i were you id stick to the tyres you have now for a while until you learn some more about forbying and setups.
not cutting into you but if you get 35s they might take you places beyond your driving capability and get you into ALOT of trouble
i ran 31's for the first few trips when i got my lux then i borrowed some 33's for a few months and then went onto 35s after id learnt a fair bit about my car,how it works,suspension mods,diy stuff and what i wanted to achieve

what do you want to achive by running 35s?
the tyres on it now are worn out 32 all terrains
so i think the 33 should be right.
thats what old mate said u will go to far and get urself into trouble.
cheers mick

i thought if i ran 35's id be able to get to the harder,better places
with a more diff clerance.
Posts: 305
Joined: Thu Oct 13, 2005 5:40 am
Location: mackay

Post by mick80 »

surfute wrote:would 33's fit with no lift ?
dude trial and error just buy 33s then put them on take it out carefully test flex if it scrubs put 2 inch lift in it.
thats all i did with my 80.
every one on here has a different opinion thats why its called a forum.
cheers mick
Posts: 91
Joined: Wed Dec 30, 2009 10:42 pm
Location: queensland

Post by surfute »

thanks mate :P
Posts: 305
Joined: Thu Oct 13, 2005 5:40 am
Location: mackay

Post by mick80 »

sweet bro c ya round da tracks
cheers mick
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Post by thehanko »

for those unsure of redrilling perches here is some pics.

in this case i only wanted to move it a small distance so had to fill the old hole prior to re drilling it.

on a hilux the passenger side already has some extra holes, whilst the driver side only has the center one.

Image

Image
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Posts: 32
Joined: Tue Jun 09, 2009 9:58 pm
Location: Perth

Post by Rota »

After you have redrilled the perches and the diff is moved forward does all the steering still work ok? Or will that have to be modified too?
Post Reply

Who is online

Users browsing this forum: No registered users and 97 guests