Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GQ geabox into GU?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 69
Joined: Mon Jan 03, 2005 11:37 am
Location: Mildura, Victoria

GQ geabox into GU?

Post by darnoldrs »

I know this has been asked a hundred times before but in every thread it was never clear to me what was required to make it fit.
I have a GU that has lost 5th gear so the gearbox has to come out and be repaired or replaced.
I also have a hydraulic winch that i thought would be far better if I could run a seperate pump on the PTO of a GQ gearbox it It will fit without to much tunnel mods.
So from thoes in the know that have done this, what was required to make it fit.
I have a 99 GU wagon, td4.2t and manual.
2002 GU TD42T ST wagon. TMIC & 2012 Hilux scoop
4" Lift, 90 series koni's, King springs, 4H Drop boxes, seperior super flex arm, MM hydraulic winch,
315/75/16 Goodyear Kevlar MTR's.
Top
Posts: 286
Joined: Tue May 11, 2004 8:48 pm
Location: Toowoomba

Post by patrol man »

The gear stick on the GQ sits to far forward for the GU, some people use the guts from a GQ and rebuild their GU box with that, as the cases and top plate are different.
but this doesn't help with the PTO idea.


If you where keen enough you could cut,weld and machine back the top plate of your GU box to fit on the GQ box, this would get the gear stick position right and allow for the PTO on the side.
Top
Posts: 239
Joined: Mon Dec 01, 2003 8:43 am
Location: Brissy southside

Post by Josh_GQ »

The through-out bearing is a different size to. I'm sure you could easily work around this though, just something to look at.

I tried to use my mates GQ throughout bearing after waiting for over 4 weeks for nissan to order me one for my GU. No way it was fitting on there
Top
Posts: 69
Joined: Mon Jan 03, 2005 11:37 am
Location: Mildura, Victoria

Post by darnoldrs »

guess it is not an simple thing to do then :cry:
I will have to get one out and have a look at them side by side and try to figure something out. :?
2002 GU TD42T ST wagon. TMIC & 2012 Hilux scoop
4" Lift, 90 series koni's, King springs, 4H Drop boxes, seperior super flex arm, MM hydraulic winch,
315/75/16 Goodyear Kevlar MTR's.
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

darnoldrs wrote:guess it is not an simple thing to do then :cry:
I will have to get one out and have a look at them side by side and try to figure something out. :?
convert it to auto :armsup: :armsup:
Top
Posts: 283
Joined: Fri May 20, 2005 1:55 pm
Location: maitland

Post by matto »

i have a gq gbox in my gu, had to cut the floor drop the gearbox down a little and cut and weld the gear leaver.
nissan 98 gu 5" lift 37 creepys, 80%reduction gears, front locker and a gen3 and no money.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 86 guests