Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
warn highmount anodise or powder coat
Moderators: toaddog, TWISTY, V8Patrol, Moderators
warn highmount anodise or powder coat
Hay any one powder coated or maybe even anodised there high mount bits a peices ive gt mine stripped apart and sanded back just thinking weather to spray powder coat or anodise. can you do this without to much hassel.
Blown ls1 GQ winch truck. and GU tow car / daily
SA5 zinc coating would be the best approach, our suspension and steering components are coated in this and tested to 750 hours salt spray .
Powder coating once chiped has zero rust prevention ( if it is not pre zinced)and you are supposed to coat in zinc prior to powder coating anyway.
Powder coating once chiped has zero rust prevention ( if it is not pre zinced)and you are supposed to coat in zinc prior to powder coating anyway.
+++++NOW ON FACEBOOK++++++
www.superiorengineering.com.au
Largest 4x4 online superstore
SPONSOR OF TOUGH TRACKS
DGR RACE TEAM
JOOMBIE RACING
AMADA XTREME RACE TEAM
MAYBELINE RACING
MMM RACING
www.superiorengineering.com.au
Largest 4x4 online superstore
SPONSOR OF TOUGH TRACKS
DGR RACE TEAM
JOOMBIE RACING
AMADA XTREME RACE TEAM
MAYBELINE RACING
MMM RACING
Who is online
Users browsing this forum: No registered users and 0 guests