Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
rewiring of early rangie
Moderator: Micka
rewiring of early rangie
you guys know of any problems of doing a total rewire of a early rangie
On my first Rangie i left it too late and it melted the wireing from the head lights to the tail lights!
I had to hot-wire it just to get home.
The rewireing was not a wery tough job and in the process i was able to get rid of alot of crap i didn't need.
The diagrams are in the back of the Gregories manual, thats all i used.
I had to hot-wire it just to get home.
The rewireing was not a wery tough job and in the process i was able to get rid of alot of crap i didn't need.
The diagrams are in the back of the Gregories manual, thats all i used.
Live fast, die young and have a bloody good looking corpse.
RaginRover wrote:Not really early rangies need bugger all to run.
put some relays on the head lights.
Tom
And the blinkers, has any else priced a new blinker switch? OUCH!!!!
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
Good oputunity to do this. Like other have said, send all Lucas shit to the tip with vengence!!!!!!!!!!!!!!!!
I have pulled a few old Rangies to bits for parts, and from observatuion, it wouldn't be too difficult. Just put more fuses and relays in where the tight arses at Land Rover never did!!!!
Trav
I have pulled a few old Rangies to bits for parts, and from observatuion, it wouldn't be too difficult. Just put more fuses and relays in where the tight arses at Land Rover never did!!!!
Trav
Land Rover- The Collingwood of 4WD's!!!!
Who is online
Users browsing this forum: No registered users and 5 guests