Ok i have a 1983 hilux with a 2.4 diesel in it.
i wired up my water temp guage and now when i turn the lights on or off it spikes by about 30 degrees. (it is a digital water temp guage)
I have tried straight hard wiring to the battery to make sure it isnt wiring gremlins but it still spikes when accessories or lights go on.
does anyone have any ideas.
Cheers
Beno
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Water temp guage with wierd readings on hilux
Moderator: -Scott-
i would have thought at first that you have wired it to what you thought was an earth but is a dash light wire , but seeing as you wired it strait to the battery then the only thing i can think of is a bad earth between motor and body perhaps ?? , try hooking up a volt meter between the battery earth and where you earthed the guage and see if there is a volt reading
Who is online
Users browsing this forum: No registered users and 1 guest