Hi All,
I'm putting my 22R back together after changing the intake gasket and I've come unstuck with the vacuum hoses. I marked most of them ( I know I should have make all of em) but there is just a few that I haven't got in the right spot.
I've tried reading the vac hose diagram under the bonnet but its done 260,000ks, most of those in the mud so its pretty much useless. I've tried looking online for a diagram but all I can find is the yanky ones which don't really match up.
can anyone point me towards a usefull diagram for an Australian 22R (carby)? FYI its sitting in a 4 Runner Sports
cheers!
on a side note I thought I had a cracked head because I had coolant in pot 1, turns out the gasket between No 1 Intake and No1 water galley has gone to shit and was letting tiny bit of water in...allot cheaper to fix!
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
22R Vacuum Hose Info/Diagram
Moderators: toaddog, Elmo, DUDELUX
Who is online
Users browsing this forum: No registered users and 6 guests