Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Am i able to change my rear diff centre 94 hilux to hi pinion, i've herd you use the front of the 80 series cruiser if so what do i need to change.
Can i use my diff lock and crown and pinion?
Steve
It will all bolt in and work fine .... but ... with it in the rear you will be driving forward on the weaker side of the C&P gears so will not be as strong.
91' Hilux Surf with the usual mods & a few different ones ....
Coil SAS by www.budscustoms.com.au
Willy, are you saying that getting the matching ratio's is an issue or that they physically won't fit into the housing cause the ridge in the housing for crown wheel clearance is in the wrong place
91' Hilux Surf with the usual mods & a few different ones ....
Coil SAS by www.budscustoms.com.au
Might be the hard way to do things, but would it be a viable alternative to cut all the mounts off the axle housing, and flip it so the pinion is sitting high?
Obviously there will be issues with the filler and dain plugs, but could this work? I'm getting sick of breaking tail shafts!
i fitted a high pinion ctr to the rear of my hilux as i was having the same probs breaking unis
fitted the airlocker and it is all good have to use the right bearings to suit the locker of course as the high pinions are different to lsd hemis
was running 35"tyres and never had it breakdid about 45thousand kms with it and never had any more dramas with unis and ctr bearings
FOR SALE hilux parts all models
have most parts available from early to late
call mick 0415156693
