Hi
I don't currently have any problem with my Motor or ECU but have tried to read the ECU with two different OBD11 Readers in both cases the devices came back with a protocol error or simply could not read the ECU!
I also tested my Daughters Toyota Starlet with one of the tools and it gave a similar error!
The question is why!
I have been chasing the subject up but have not found a solution yet.
From what I can see there are several different protocols in use, trust the Automotive industry to yet again make nothing standard!
But it also seems the Pin put of the plug may differ, I guess the question is then what Protocol is Toyota using and what pins are what?
It seems the Power pins are correct as the most recent unit I have purchased tells me the correct Battery voltage but still fails to talk to the ECU.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
78 Series - 2005 - is it OBD11 compliant?
Moderator: -Scott-
78 Series - 2005 - is it OBD11 compliant?
Peter - VK4FSD
Toyota 78 Series Troopy 4.2 TD Locked and loaded.
River City 4WD Club - President and Bulletin editor
Toyota 78 Series Troopy 4.2 TD Locked and loaded.
River City 4WD Club - President and Bulletin editor
Who is online
Users browsing this forum: No registered users and 0 guests