Gday all,
Another problem arising from my weekend away...
The brakes are not working well. After continued use into the camping location, the brake light came on on the dash and the brake pedal went hard and the brakes barely worked.
After putting up with it throughout the weekend, i figured it was vacuum because they work fine if i use them sparingly, but if i pump the pedal etc, they fail. Also, as i start the car, the light comes on and then slowly fades as though it slowly builds vac...
Is this right?
I bought a vac meter to measure the pressure, but cant find out what it should be... anyone know that numbers for the vac pump, reservoir etc?
Any help appreciated, thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Brake issues, Vacuum?
Moderators: toaddog, Elmo, DUDELUX
A VAC leak sounds probably, I am assuming the fluid level is ok? Yours have a vacuum clutch booster? Hows the clutch feel? Maybe try blocking off the clutch incase you are loosing vac through the clutch
The Silver Bullet - BJ74
Where the actions at Ontrack 4wd Club
http://www.ontrack4wdclub.com/
[url]http://www.cams.com.au/[/url]
Where the actions at Ontrack 4wd Club
http://www.ontrack4wdclub.com/
[url]http://www.cams.com.au/[/url]
Resident Terrorist
Check out the blades in your vacuum pump. The ones on the 80 series diesel are bakelite and when worn/damaged will reduce its ability to create vacuum.
What vacuum reading did you get with your gauge? I haven't played with diesels much but I assume the vac pump would need to generate similar vacuum pressure to what a petrol motor creates to provide optimal brake assist. Healthy petrol vacuum is about 20in/Hg so you should be getting this. If not then you have problems in the vac pump.
Hopefully someone who has more experience with diesel vac pumps can confirm or correct what I've suggested.
What vacuum reading did you get with your gauge? I haven't played with diesels much but I assume the vac pump would need to generate similar vacuum pressure to what a petrol motor creates to provide optimal brake assist. Healthy petrol vacuum is about 20in/Hg so you should be getting this. If not then you have problems in the vac pump.
Hopefully someone who has more experience with diesel vac pumps can confirm or correct what I've suggested.
pump
Thanks.
I pulled a vac line off the pump and straight away got around 25in/Hg. So i think it's fine
Then i pulled off the vac line to the booster and heard the 'psst' of the vac and plugged my meter in. It SLOWLY rose to the same level as the pump. (or just under)
I also found that there is a sensor on the vac reservoir going to the brake booster, so the problem could be arising from there.
I might unplug the clutch reservoir and plug that into the brakes and see if that fixes it, if so, i might need a new reservoir......$$$$
I pulled a vac line off the pump and straight away got around 25in/Hg. So i think it's fine
Then i pulled off the vac line to the booster and heard the 'psst' of the vac and plugged my meter in. It SLOWLY rose to the same level as the pump. (or just under)
I also found that there is a sensor on the vac reservoir going to the brake booster, so the problem could be arising from there.
I might unplug the clutch reservoir and plug that into the brakes and see if that fixes it, if so, i might need a new reservoir......$$$$
Who is online
Users browsing this forum: No registered users and 2 guests