Im after any help / past experience on fitting Holden 5L VN 304i to 89 GQ lwb tb42.
Already have Castlemain Rod Shop kit and Marks Adptors engine mount kit and h/d clutch kit.
Motor is bolted up to bellhousing after remouldin the fire wall on the passenger side.
Having trouble lining up the engine mounts to sit flush on the chassi rails.
What other things have others had trouble with?;
wiring,
exhaust,
heater/radiator plumbing,
air intake,
vaccum hoses,
endless air,
anything else???
Thanks in advance!
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
GQ 5.0L conversion
GQ 5.0L conversion
Last edited by gut42 on Tue Mar 09, 2010 3:15 pm, edited 1 time in total.
i got nothin
5.0l conversion
ive got same year model with the 5.0l 304 motor in it ive got custom engine mounts an your exhaust needs to b modified due to lack of space ive got custom extractors on mine wat elese u need to know
from what ive read doesnt seems that any one is ever happy with either of the kits... but hey your putting an engine into a car thats not ment to have it.. gotta expect something..gut42 wrote:Not happy with the castlemain rod shop bellhousing, I should have just spent the extra $ and did a marks adpt kit.
But its finished after 6 months off the road.
Probly true!macneil wrote:from what ive read doesnt seems that any one is ever happy with either of the kits... but hey your putting an engine into a car thats not ment to have it.. gotta expect something..gut42 wrote:Not happy with the castlemain rod shop bellhousing, I should have just spent the extra $ and did a marks adpt kit.
But its finished after 6 months off the road.
Its all the little things that are really annoying! Especially the fact that nissa run metric bolts and holden run imperial!
Still worked out cheaper for me than going turbo deisel.
i got nothin
Cars up and running thanks to my freindly mechanic and auto sparky!
I now have a GQ efi tank with pump and sendr to put in and a rear bowl sump as advised.
If I was ever to do a conversion again, (probly not) I would buy a doner car and transplant everything I could ie; motor, box, wiring, ignition, dash, radiator, fuel tank, ect so that it would be as close as possible to how it was in its old home.
I think that would be the best way so you could see what went where and what it did. I have never seen under the bonnet of a V8 commodre in any detail so I wasnt sure what went where and did what??? I had to rely on other peoples knowledge and knowhow to get the job done this made it a lengthy process!
Having said that the power it good especially in low range
I now have a GQ efi tank with pump and sendr to put in and a rear bowl sump as advised.
If I was ever to do a conversion again, (probly not) I would buy a doner car and transplant everything I could ie; motor, box, wiring, ignition, dash, radiator, fuel tank, ect so that it would be as close as possible to how it was in its old home.
I think that would be the best way so you could see what went where and what it did. I have never seen under the bonnet of a V8 commodre in any detail so I wasnt sure what went where and did what??? I had to rely on other peoples knowledge and knowhow to get the job done this made it a lengthy process!
Having said that the power it good especially in low range
i got nothin
Who is online
Users browsing this forum: No registered users and 73 guests