Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

gq 4.2 turbo diesel

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 14
Joined: Tue Aug 08, 2006 9:09 pm
Location: Gippsland

gq 4.2 turbo diesel

Post by hedgy »

My mate is looking to build new engine, turbo etc in his GQ 4.2 diesel. Need some opinions on who to use for the build and what sort of turbo/injector pump etc to use.
GU PATROL 4.8 TURBO
Posts: 232
Joined: Sat Dec 05, 2009 6:33 am
Location: BUNDY

Re: gq 4.2 turbo diesel

Post by RIZZO »

hedgy wrote:My mate is looking to build new engine, turbo etc in his GQ 4.2 diesel. Need some opinions on who to use for the build and what sort of turbo/injector pump etc to use.
definatly go garret gt2860 turbo they work excellent with the 4.2diesel, plenty of torque
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: gq 4.2 turbo diesel

Post by bogged »

hedgy wrote:My mate is looking to build new engine, turbo etc in his GQ 4.2 diesel. Need some opinions on who to use for the build and what sort of turbo/injector pump etc to use.
if your lucky, turbos may have been discussed 10 times a day for the last 5 years previously, but Im not quite sure.
maybe http://www.outerlimits4x4.com/phpBB2/search.php may assist you.
Posts: 177
Joined: Mon Sep 28, 2009 10:03 pm
Location: caboolture

Post by anzac »

I'm pretty sure a search would have covered this a million times over but whatever.

GT2860RS turbo with .64 exh housing. You'll need an oil and water line kit with an oil restrictor, a T3 to T25 flange adaptor as most of these turbos come with T25 flanges but patrols are T3 and wastegate actuator to suit the boost levels you're after.

Pump, I'd suggest trying to get a standard GU pump as they have the factory boost compensator fitted. A good tuner will be able to get great results out of that combination. 150hp+

If you need help with the turbo, PM me
Posts: 413
Joined: Sun Apr 27, 2008 8:41 am
Location: South Is, NZ

Post by twodiffs »

anzac wrote:I'm pretty sure a search would have covered this a million times over but whatever.

GT2860RS turbo with .64 exh housing. You'll need an oil and water line kit with an oil restrictor, a T3 to T25 flange adaptor as most of these turbos come with T25 flanges but patrols are T3 and wastegate actuator to suit the boost levels you're after.

Pump, I'd suggest trying to get a standard GU pump as they have the factory boost compensator fitted. A good tuner will be able to get great results out of that combination. 150hp+

If you need help with the turbo, PM me
Is that what they call an aneroid??

Do all TD42 GU pumps have the aneroid/boost controller AND 11mm plunger or is it from a certain year/model onwards???
1991 GQ TD42 Safari, 5spd, 4" Lift, 35" shovels, Locked & Loaded.
Posts: 175
Joined: Tue Feb 23, 2010 4:49 pm
Location: Dyno

Post by UGOTNUFN »

twodiffs wrote:
anzac wrote:I'm pretty sure a search would have covered this a million times over but whatever.

GT2860RS turbo with .64 exh housing. You'll need an oil and water line kit with an oil restrictor, a T3 to T25 flange adaptor as most of these turbos come with T25 flanges but patrols are T3 and wastegate actuator to suit the boost levels you're after.

Pump, I'd suggest trying to get a standard GU pump as they have the factory boost compensator fitted. A good tuner will be able to get great results out of that combination. 150hp+

If you need help with the turbo, PM me
Is that what they call an aneroid??

Do all TD42 GU pumps have the aneroid/boost controller AND 11mm plunger or is it from a certain year/model onwards???
All factory turbo GU's have an aneroid and are an 11mm pump. Try and get the non-intercooled pump so you dont have to muck around with TCV wiring.
Posts: 177
Joined: Mon Sep 28, 2009 10:03 pm
Location: caboolture

Post by anzac »

^^^^ what he said.

most people understand 'boost compensator' better than anearoid but it's the same thing yes.

If you can dodge the extra wiring from the later model pump it'll be a lot easier so that should be anywhere up to 2004? As long as it's not factory intercooled whatever year that started anyway.

What this means is that you can have a normal 'base' fuel rate and as you build boost it adds the respective ammount of fuel so that you can achieve a good air fuel ratio across the whole rev range.

without a boost compensator, it is always a compromise with your tune. Good fuel at low rpm and there isn't enough at higher rpm to make power, enough fuel for higher revs and good power means too much fuel down low, poor fuel economy and sometimes a bit smokey.

When you go to talk to a tuner, make sure they specialise in diesels and ask them do they adjust the boost compensator and fuel, if they give you a blank look, make sure they realise it's a GU pump and if they still don't get it, find another tuner. Someone who knows what they are doing can really make a truck hammer with that setup. I'm not from Vic so I don't know any good tuners. If he feels like coming to QLD I can sort him out with a good local guy. :P
Posts: 413
Joined: Sun Apr 27, 2008 8:41 am
Location: South Is, NZ

Post by twodiffs »

Cheers guys, that answered my Q perfectly :D
1991 GQ TD42 Safari, 5spd, 4" Lift, 35" shovels, Locked & Loaded.
Posts: 748
Joined: Tue Nov 09, 2004 9:45 pm
Location: Lilydale

Post by Dzltec »

Beware of some of the real early Gu pumps, they had a 10mm plunger or head and rotor.


Andy
www.diesel-tec.com.au Ph 03 9739 5031
Ball bearing turbo upgrades for factory turbo vehicles. Got a diesel question just ask.
Home of the twin turbo shorty and many 150rwkw+ patrols.
Posts: 413
Joined: Sun Apr 27, 2008 8:41 am
Location: South Is, NZ

Post by twodiffs »

ok, anyway simple way of identifying them while on the engine?
1991 GQ TD42 Safari, 5spd, 4" Lift, 35" shovels, Locked & Loaded.
Posts: 175
Joined: Tue Feb 23, 2010 4:49 pm
Location: Dyno

Post by UGOTNUFN »

twodiffs wrote:ok, anyway simple way of identifying them while on the engine?
Yep

The id number will start with VE6/10 if its a 10mm pump and VE6/11 if its 11mm.
Posts: 413
Joined: Sun Apr 27, 2008 8:41 am
Location: South Is, NZ

Post by twodiffs »

Good man...thank you very much :D
1991 GQ TD42 Safari, 5spd, 4" Lift, 35" shovels, Locked & Loaded.
Posts: 4330
Joined: Tue Jun 08, 2004 6:06 pm
Location: Central Victoria

Re: gq 4.2 turbo diesel

Post by coxy321 »

hedgy wrote:My mate is looking to build new engine, turbo etc in his GQ 4.2 diesel. Need some opinions on who to use for the build and what sort of turbo/injector pump etc to use.
Give Andy at dieseltec a call.
Posts: 31
Joined: Fri Dec 14, 2007 6:33 pm
Location: Bundy

Post by yamahasRsweet »

anzac wrote:
most people understand 'boost compensator' better than anearoid but it's the same thing yes.
How can you tell by looking at it if it has a boost compensator fitted?
Posts: 89
Joined: Mon Jun 05, 2006 9:26 am
Location: Sutherland Shire NSW

Post by GQSWB42td »

[quote

All factory turbo GU's have an aneroid and are an 11mm pump. Try and get the non-intercooled pump so you dont have to muck around with TCV wiring.[/quote]


can anyone tell me what a TCV is
building
Post Reply

Who is online

Users browsing this forum: No registered users and 88 guests