Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Tacho signal wire from 1HD-FTE ECU

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 550
Joined: Tue Mar 04, 2008 7:40 pm
Location: Gympie Qld

Tacho signal wire from 1HD-FTE ECU

Post by fester2au »

Guys I am having trouble identifying the signal wire from a 1Hd-FTE ute ECU so need help, I expect the wagon version uses the same trigger also. No sure of year but it would be an early version I expect (pre 2000 ish).

I need the wire colour code and/or the pinout location from the ECU. Actually ECU pinout would be handy to cross reference.

I have the factory manual on CD but the wiring section is not that straight forward to follow, at least not like older style wiring diagrams.
Top
Posts: 3224
Joined: Thu Apr 15, 2004 9:36 pm
Location: Lost in the Cleland fog!

Post by ferrit »

if you have a wagon 1HD-FTE, doesnt that loom run CAN-BUS, which confuses the hell out of everything as its common wires for data, not electrical current?
2005 HDJ100 Manual, ARB bar, XD9000 winch, ARB rooftop tent + awning, Drawers, Engel, 2" OME lift, 285/75R16 KM2's, iCom, HID XGT's.
Top
Posts: 550
Joined: Tue Mar 04, 2008 7:40 pm
Location: Gympie Qld

Post by fester2au »

ferrit wrote:if you have a wagon 1HD-FTE, doesnt that loom run CAN-BUS, which confuses the hell out of everything as its common wires for data, not electrical current?
That could explain why the wiring diagrams seem to disappear into thin air or at least have very few wires. My engine is ute based but unfortunately I only have the wiring diagram (factory CD) from the wagon. I was hoping it would be fairly clear. Maybe I need to find the wiring for a ute.
Top
Posts: 4225
Joined: Tue Jun 17, 2003 8:58 pm
Location: sunshine coast australia

Contact:
Contact mud4b

Post by mud4b »

Im sure the wire was brown and is tucked up in behind the cluster, i still have the printout of the loom to suit it, ill see if i can find it for you and post it off.

cheers mark.
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
Top
Posts: 550
Joined: Tue Mar 04, 2008 7:40 pm
Location: Gympie Qld

Post by fester2au »

mud4b wrote:Im sure the wire was brown and is tucked up in behind the cluster, i still have the printout of the loom to suit it, ill see if i can find it for you and post it off.

cheers mark.
Thansk Mark, just that some of the masking tape labels are finally starting to fade out so I'm not totally sure and wanted to cross check properly. Haven't looked that far intot he dash but will when I swap tachos over. If you can find that printout it would be handy.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest