Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Tunnel rams with two single port EFI

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
User avatar
DAZ
Posts: 1689
Joined: Sat Feb 22, 2003 7:40 pm
Location: Shepparton Vic

Tunnel rams with two single port EFI

Post by DAZ »

I have a 383 chev V8 in my 40 serries and was wondering if i was to get a manifold to take two carbies and put two single port injection carbies on top , say off XF falcon i think ran these would this work and be cost effective ? any thoughts .
Top
Posts: 593
Joined: Sat Nov 09, 2002 8:06 pm
Location: Traralgon Vic Aust.

Post by DAZZ »

I think the system you are describing is from a EA CFI system. These are not good.....
Top
User avatar
DAZ
Posts: 1689
Joined: Sat Feb 22, 2003 7:40 pm
Location: Shepparton Vic

Post by DAZ »

ok thanks can that then . Is there a single port carbie that is ok that is cheap easy to get and would work ? even if only one on my edelbrock manifold i have now
Top
Posts: 1767
Joined: Wed Jun 04, 2003 9:30 am
Location: Just Near Fraser Island

Contact:
Contact Maggot4x4

Post by Maggot4x4 »

Why are you wanting to change your current set up? What carby you running now?
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
Top
User avatar
DAZ
Posts: 1689
Joined: Sat Feb 22, 2003 7:40 pm
Location: Shepparton Vic

Post by DAZ »

IM thinking if i can get efi at a resonable price ill ditch the gas more power and lighter no harm in considering all the options
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Re: Tunnel rams with two single port EFI

Post by Loanrangie »

DAZ wrote:I have a 383 chev V8 in my 40 serries and was wondering if i was to get a manifold to take two carbies and put two single port injection carbies on top , say off XF falcon i think ran these would this work and be cost effective ? any thoughts .


I saw someone who was running a 460 BB in a ford landau that was using 2 EA port injectors and used a Megasquirt ecu on a manifold that looked a bit like a rover twin carb setub. Supposedly ran great with heaps of power.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 5 guests