Noticed that the manifold flange has a divider in the middle.
Can i get a accurate reading from only 3 cylinders exhuast output??
Is this location on the left side ok???
Grant.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
1HZ pre turbo EGT position?
Moderators: toaddog, Elmo, DUDELUX
1HZ pre turbo EGT position?
Looking to fit my EGT Probe pre Turbo.
Noticed that the manifold flange has a divider in the middle.
Can i get a accurate reading from only 3 cylinders exhuast output??
Is this location on the left side ok???
Grant.
Noticed that the manifold flange has a divider in the middle.
Can i get a accurate reading from only 3 cylinders exhuast output??
Is this location on the left side ok???
Grant.
GU III TD42T UFI18G Cross Country IC, 20 PSI. Neeeeeed mooooore Fueeeeeel.
Yeh. that was the other location i was thinking of, so it doesnt interfear with gas flow into the turbine???Z()LTAN wrote:unfortunately thats not ideal mate.
The back of the turbo snail just after the mounting flange would be the best spot for a preturbo egt probe.
GU III TD42T UFI18G Cross Country IC, 20 PSI. Neeeeeed mooooore Fueeeeeel.
Who is online
Users browsing this forum: No registered users and 0 guests