Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

New clutchplate installation - which direction?

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Forum rules
Post Reply
Posts: 606
Joined: Fri Jun 10, 2005 6:48 pm
Location: Victoria

New clutchplate installation - which direction?

Post by vanzbrown »

My dad has an old petrol rocky, think it was an '85.

Anyways, took the clutch plate without taking too much notice, and now unsure which direction the new one goes back in...

One side has a bigger lip than the other side, and also the springs stick out further this side...

Looking at a manual online it looks like the side with no lip should be facing the flywheel, but its hard to tell from this diagram...

Edit: Said the one side of the clutch plate has T-N side on it, dunno what it all means but.

Just wondering if anyone knows for sure, sorry buts thats about all the info i have at this stage, just got off the phone.

Thanks in advance.
Top
Posts: 51
Joined: Sun May 21, 2006 3:25 pm
Location: Ipswich

Post by buddah_04 »

yeah the side with 'the bigger lip' faces the gearbox. ull find if you put it in the other way, 95% of times the clutch springs will hit the flywheel bolts.

also alot of the clutches these days have either 'flywheel side' or 'gearbox side'
Top
Posts: 606
Joined: Fri Jun 10, 2005 6:48 pm
Location: Victoria

Post by vanzbrown »

Thanks a lot mate, very much appreciated!
Top
Post Reply

Return to “Ford / Mazda / Daihatsu / Homeless”

Who is online

Users browsing this forum: No registered users and 19 guests