Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

MQ patrol HELP

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 23
Joined: Fri Jan 29, 2010 9:30 pm
Location: Brisbane

MQ patrol HELP

Post by mqharko »

My 1983 MQ diesel patrol is currently not starting. The engine cranks slowly when i go to start it but it will not kick over. This all started happening a week ago when i was going through a water crossing. While i was driving my car just stopped. It was as if the key had just been turned off. From then on it would not start. I have considered water in the engine, but so far nothing has pointed towards that and the water i was going through was only just above my tyres, i had been doing deeper all day. Has anybody experienced anything similar? Any idea's on things i could do/check?

Cheers in advance.
User avatar
N2O
Posts: 30
Joined: Thu Jun 21, 2007 7:23 am
Location: Poland

Post by N2O »

Disconnect linkage from EDIC motor on injection pump, so that the lever is verticaly(it's run position, towards front of the car it's start). Give current for 10-15 seconds to the glowplugs, and then quickly try to start it.
Posts: 23
Joined: Fri Jan 29, 2010 9:30 pm
Location: Brisbane

Post by mqharko »

can anybody give some directions for how to do that?
God of Magnificant Ideas!
Posts: 6774
Joined: Mon Aug 04, 2003 11:22 am
Location: Balls Deep

Post by V8Patrol »

pull the starter motor out and strip it down and clean out the gunk.....

or get it serviced profesionaly

:cool:
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests