Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

UHF, HF, RFDS, HAM

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply

Which ones do you use?


UHF
26
70%
AM (HF or CB)
1
3%
RFDS (probs aswell)
0
No votes
Ham radio
3
8%
UHF and AM are a must
7
19%
 
Total votes: 37

Posts: 10
Joined: Tue Nov 03, 2009 8:22 pm
Location: Melbourne

UHF, HF, RFDS, HAM

Post by thekingoffoxes »

Been on a few trips over the years, and noticed that theres alot of UHF vs AM radios going on. Personaly I've found HF to be a clear winner for long trips of 4x4ign, went up to Walhalla a few months ago, with UHF and AM, found that the UHF was not to good on the highway due to my mate having a not so good unit, so we swapped over to the HF and were suprised by the quality, when we got up into the hills the UHF was dead and we could only comunicate over the HF, so i'll be sure to have both AM and UHF in my truck from now on, (UHF incase of a need to talk to who ever else is out there)
Posts: 410
Joined: Sun Jun 29, 2008 11:30 pm
Location: Melbourne, Australia

Post by craz3d »

AM is great for long distance, with LSB etc. UHF is a must for emergencies and general road use though.. I do need to upgrade my units from handhelds and get actual antennas as you say though :P
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

Can we agree on a few terms?

HF is often used for the Codan / Barrett style of (higher powered) radio which is also often referred to as "RFDS" radio.

Reading the original post, and looking at the title of the thread and the poll, I suspect HF has been used to describe the old 27MHz (original) citizen band radio (available as both AM & LSB/USB).

For the purposes of this thread, can we use 27MHz / 27Meg for the old skool CB, and HF for the RFDS style radio (which still requires a license)?
Posts: 848
Joined: Fri Apr 02, 2004 12:01 pm
Location: Central Victoria

Post by Patroler »

UHF for car to car, HF for emergency and long range (barrett 550) my HF radio also has 27MHz programmed (LSB AM USB) which could be useful for car to car if someone else has a 27MHz set and UHF is crowded.
You also have the option of linking the HF to the phone system to call and recieve phone calls - i don't have this, its an extra 100 a year on top of vks 100/year
There are no stupid questions, but there are a LOT of inquisitive idiots
Posts: 10
Joined: Tue Nov 03, 2009 8:22 pm
Location: Melbourne

Post by thekingoffoxes »

yeah, i should have made it more clear, i was going to refrence it as 10 meters, but not many people know that (AM/SSB)/27meg/HF/CB are all the same thing. I have been meaning to get my amature licence for a while now, and not being involved with RFDS i wasnt sure as to what else it was called.
Posts: 206
Joined: Fri Feb 13, 2009 10:08 am
Location: Melbourne

Post by PBBIZ2 »

Uhf for normal group comms, 27mhz am/usb/lsb, mostly redundant from earlier days, HF with VKS737/Radtel phone connect for remote area contact plus Thuraya Satellite/GSM phone, and Next G phone - yep, a bit anal about having contact in an emergency.
Master of my own domain
Posts: 1516
Joined: Mon Apr 21, 2008 8:01 pm
Location: Shellharbour, NSW

Post by mike_nofx »

I voted HAM.

By far the best tasting radio yet
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

thekingoffoxes wrote:not many people know that (AM/SSB)/27meg/HF/CB are all the same thing.
Because they're not.

CB stands for "Citizen's Band", which initially referred to the 27MHz bandwidth allocated for AM & SSB use, and later came to include the 477MHz bandwidth allocated to (FM) UHF use. These radios are limited (I believe) to 5 Watts transmission power.

What is commonly referred to as "HF" radios (in Australia, mainly Codan and Barrett) typically transmit AM or SSB (LSB only?) over the 3MHz to 30MHz range, which just happens to include the original 27MHz CB channels. These HF radios are programmed to operate only on the frequencies for which the owner is licensed (and the citizen's band frequencies). Other than the CB frequencies, these radios typically transmit 25W, and some can transmit significantly more.

Amateur (or "HAM" radios) require a license, after which operators have much more freedom with which to experiment, and can use much more power.

Yep. Another busy Saturday night for me! :oops:
User avatar
RN
A speed camera would have prevented that!
Posts: 15822
Joined: Sat Feb 05, 2005 3:46 pm
Location: Check your six.

Post by RN »

-Scott- wrote:
thekingoffoxes wrote:not many people know that (AM/SSB)/27meg/HF/CB are all the same thing.
Because they're not.

CB stands for "Citizen's Band", which initially referred to the 27MHz bandwidth allocated for AM & SSB use, and later came to include the 477MHz bandwidth allocated to (FM) UHF use. These radios are limited (I believe) to 5 Watts transmission power.

What is commonly referred to as "HF" radios (in Australia, mainly Codan and Barrett) typically transmit AM or SSB (LSB only?) over the 3MHz to 30MHz range, which just happens to include the original 27MHz CB channels. These HF radios are programmed to operate only on the frequencies for which the owner is licensed (and the citizen's band frequencies). Other than the CB frequencies, these radios typically transmit 25W, and some can transmit significantly more.

Amateur (or "HAM" radios) require a license, after which operators have much more freedom with which to experiment, and can use much more power.

Yep. Another busy Saturday night for me! :oops:
I have a Cobra 146 Gtl 27 meg am radio. Since mounting it in the garage and placing the standard arial on the roof I am tuning into conversations from as far a New Zealand and Queensland. The signal comes in quite stong depending on the skip.

Although not as clear as the UHF, there are less dickheads on this system.

I can't transmit very far but I can listen in.
I am the Nightrider! I am the chosen one. The mighty hand of vengeance, sent down to strike the unroadworthy!
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests