Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

1.6 adaptor plate?

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 48
Joined: Sat Jul 25, 2009 1:55 am
Location: sale

1.6 adaptor plate?

Post by chester_390 »

anyone have instructions how to fit this? do u use sierra or vittara engine mounts etc????????
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

what plate / kit did u get or have u got?
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Posts: 784
Joined: Mon Nov 15, 2004 8:10 pm
Location: Labrador, Gold Coast

Post by matsmad »

I used this kit off ebay. very easy to fit came with everything u need. so much easier than making it up yourself!

http://cgi.ebay.com.au/Suzuki-Sierra-Sa ... 19ba7387ca
06 Grand Vitara Prestige, 2" lift, Kumho A/Ts, ARB winch bar, snorkel, spotties. Also a Regal 2150 LSC Volva Penta 350 gsi duoprop, and a kayak ;-)
Top
Posts: 48
Joined: Sat Jul 25, 2009 1:55 am
Location: sale

Post by chester_390 »

I got the kit offsuzistore came with mounts the plate and bolts but no isntructions cos the mounts are different but then I dunno if u use the Sierra ones or the vitara ones on the block
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

Have u thought to ask suzistore?

but yes BenTs kit is good.
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Posts: 48
Joined: Sat Jul 25, 2009 1:55 am
Location: sale

Post by chester_390 »

yea i emailed them but got no response
Top
Posts: 27
Joined: Thu Jan 01, 2009 4:57 pm
Location: Australia

Post by zookeenie »

use the sierra engine mounts,but you will have to cut a small section out of the clutch cable bracket where it fouls with the r/h engine mount. when you have it all ready to go back in,dont tighten up the new mounting plates for the engine mounts(the black ones that came in kit)untill you do a trial fit,this way they are easily swapped around if required,once happy with position tighten up and bolt to engine bay...hope this helps..
sierras....There Boxy But There Good
Slow....4Low.....And Up We Go!
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 69 guests