Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

H-lux

Tech talk for Hilux

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 5
Joined: Wed Feb 18, 2004 6:20 am

H-lux

Post by aknight »

Anyone know how easy is it to change a cam belt on a hi-lux surf me rads leaking so needs to come out for repair I thought I do cam belt while Im halfway there someone did mention about crankshaft pulley bolt needs to be locktighted on any tips would be handy.
Alfie.
Top
Posts: 3224
Joined: Mon Jan 12, 2004 6:03 pm
Location: Moggill

Post by phippsy »

If it's the 2l-t motor, have a look at a Gregory's manual for the swb cruiser that had the same engine in it. Even if you buy the book at least you'll have a reference for the motor itself.
Top
Posts: 638
Joined: Mon Nov 04, 2002 7:52 am
Location: A little north of sydney

Post by dave »

Not that hard two do although the manual would be advisable if you havnt done it before.The cranksharft pully bolt is very tight and a puller is required to remove the crank pully.Make sure you crank the motor over antill all timing markers line up before you remove the belt.
Top
Post Reply

Return to “Hilux”

Who is online

Users browsing this forum: No registered users and 0 guests