Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Bigger Valves for Inflating Tyres

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Bigger Valves for Inflating Tyres

Post by greg »

Hi All,

Just wondering if anyone has replaced their standard tyre valves for a larger valve (i.e. Nitto 1/4") to allow faster tyre inflation?

If yes - what setup (fittings / meter / pressure valve) did you use?

Thanks,
Greg
DMA Founding Member #1 - Now Retired
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

will help greater in deflation also.

what pump are u going to use?
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Contact:
Contact Gwagensteve

Post by Gwagensteve »

The only high flow valves I've seen have been things like drain cocks welded in to get the air out faster, not in.

You need to experiment with different valve cores or not doing yours up so tight after you've deflated to prevent the cycling you are seeing at the moment. Inflation times won't be seriously affected by the size of the valve considering your compressor only flows 6 cfm. If you had a large tank - cool, (which is why you remove cores for reseating beads) but once the tank is at tyre pressure, you're back to 6 CFM and you don't need big vlaves to flow that.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Top
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

Post by pongo »

truck tyre fitters just unscrew the valve then screw on a fitting to where the valve cap goes then simply clip on the air hose. allows full flow from a compressor. They over inflate then remove fitting and quickly screw in valve.

works a treat.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 129 guests