Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
now the thing where im getting lost is with the positive input from winch switch part
now in this crap diagran i quickly made, does this look right as from the winch I have 3 wires (Warn Highmount) , in, out and the other would be the positive??
so with what i have does this look correct in that I join both wires from switch and winch together to the 86 terminal???
ok the way i read it is that you need to pick up a postive power say from the solenoid that only gets power once you hit the winch switch/hand controller. then that power that goes 2 86 then switches the coil and then supplies power to pin 87 and then powers up the blue override wire on your red arc unit thenlinking the 2 batteries together
