Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

40 series and 75 series axle swaps

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 80
Joined: Fri Jul 02, 2004 1:27 pm
Location: Kalgoorlie W.A.

40 series and 75 series axle swaps

Post by Cluffy »

Hi guys,
Has anyone fitted a disk rear end from a 75 series to a 40 series?
Im talking whole rear axle from hub to hub.
Widths seem to be the same and I was hoping this might be another way to get a disk brake rear end and handbrake at the same time.

Thanks
Craig
...........shedbound.............
Top
Posts: 62
Joined: Sat Sep 15, 2007 10:02 pm
Location: New South Wales

Post by Shaun05 »

I asked this question a little while ago. The 75 diff is not a straight roll under affair. You'll need to cut off the spring saddles off and reposition them to suit the 40 series spring position. Not too hard if your a good welder or know someone who can weld.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 128 guests