Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

King pins

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

King pins

Post by Struth »

Can Bunderaor 75 lower king pin/steering arms be used on a 60 series diff.

Physically they look like the same King pin arrangement and I want to use them to move the steering relay rod behind the diff.

This would allow me to move the Panhard rod in front of the diff easily and get a better panhard angle.

Then of course hopefully use a bundy steering rod (or custom unit) from the steering box to the original 60 series king pin upper steering arm on the passenger.

The 60s diff is on radius arms.


Cheers
Top
Posts: 632
Joined: Wed Sep 07, 2005 8:59 pm
Location: South Gippsland

Post by hiluxmad »

im pretty sure they are the same bearing so should be the same hilux and 60 interchange and i think 75 are the same
Keep it shiny side up!
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
Top
Posts: 1109
Joined: Mon Feb 12, 2007 8:48 pm
Location: Australia

Post by hulsty »

How will the steering rod clear the diff?

Unless you have a HZJ75 with a 8'' high pinion front diff clearance for a rear mounted steering right will be an issue
The Silver Bullet - BJ74
Where the actions at Ontrack 4wd Club
http://www.ontrack4wdclub.com/
[url]http://www.cams.com.au/[/url]
Top
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

hulsty wrote:How will the steering rod clear the diff?

Unless you have a HZJ75 with a 8'' high pinion front diff clearance for a rear mounted steering right will be an issue
Good point, it's a standard 60 series diff, will need to look at clearences when I get the car back from the repairers.

Cheers
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests