Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Removing clear coat from mags

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 3443
Joined: Tue Oct 29, 2002 10:50 pm
Location: Currently On the Road !!

Removing clear coat from mags

Post by Dozoor »

Need to remove some clear coat from a set of mags
Any idea's ?

want to polish them , usually just use the gel type paint strippers.

anything else work well ?
Top
Posts: 213
Joined: Tue Jun 10, 2008 8:54 pm
Location: brisbane

Post by lewie »

vampire urine
beer gimme gimme ! ! !
Top
Posts: 396
Joined: Tue May 12, 2009 3:03 pm
Location: Sunshine coast

Post by Middo »

im with lewie
4x4 tool kit: Duct tape and a BFH . If it moves and it shouldn't, use the tape, if it doesn't move and it should, use the hammer.
Tim
Top
Posts: 443
Joined: Tue Jan 04, 2005 10:08 pm
Location: sydney

Post by mattsluxtruck »

I just use Selleys quick strip from Bunnings and the like.
The clear coat is actually a clear powder coat so will take a couple of applications to get it all off.
Top
Posts: 213
Joined: Tue Jun 10, 2008 8:54 pm
Location: brisbane

Post by lewie »

"mattsluxtruck" question - does that work on sheilas??? :D
beer gimme gimme ! ! !
Top
Posts: 3443
Joined: Tue Oct 29, 2002 10:50 pm
Location: Currently On the Road !!

Post by Dozoor »

mattsluxtruck wrote:I just use Selleys quick strip from Bunnings and the like.
The clear coat is actually a clear powder coat so will take a couple of applications to get it all off.
Thanks ,Matt

worked a treat .
Top
Posts: 420
Joined: Thu Sep 20, 2007 10:15 pm
Location: on acid...:)

Post by tanz-e »

dip em in chrome. then screw on a rollerblade bearing... steel plate= spinners
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 0 guests