Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Need help with identification of Bullbar

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 77
Joined: Sun Feb 01, 2009 4:31 pm
Location: Brisbane Australia

Need help with identification of Bullbar

Post by bugshifter »

Can any of you help me in identifying the manufacturer of this bullbar it fit a LN series Hilux.

Or someone in Brisbane around the Acacia Ridge area the can make some brakets up for me so i can fit it as it has none.
Image

Cheers Chris
Your sister is hot but your mum does that thing with her tongue. :)
Top
Posts: 4737
Joined: Wed May 12, 2004 10:39 pm
Location: Brisbane

Post by De-lux »

My money is on TJM. The one I had on my old LN106 looked v. similar
Top
Posts: 77
Joined: Sun Feb 01, 2009 4:31 pm
Location: Brisbane Australia

Post by bugshifter »

Here is a better pic without any paint
Image
Your sister is hot but your mum does that thing with her tongue. :)
Top
Posts: 212
Joined: Tue Jan 19, 2010 10:35 pm
Location: Brisbane

Post by TroopiePete »

The light holes look similar to mine, that would make it a comercial ARB Bullbar.

But after I was told that I also found a sticker that confirmed it, I guess as you have painted yours there was no sticker & if there were it's long since been removed or covered.
Peter - VK4FSD
Toyota 78 Series Troopy 4.2 TD Locked and loaded.
River City 4WD Club - President and Bulletin editor
Top
Posts: 77
Joined: Sun Feb 01, 2009 4:31 pm
Location: Brisbane Australia

Post by bugshifter »

Thanks for your help. I bought the bar from a wreckers and it had a few various coats of paint over it with no MFR sticker anywhere. But it was when i got it home i realized it had no mounting brackets. So now just trying to find where to go to first.
Cheers for the replies :D
Your sister is hot but your mum does that thing with her tongue. :)
Top
Posts: 212
Joined: Tue Jan 19, 2010 10:35 pm
Location: Brisbane

Post by TroopiePete »

Short of actually taking it to someone like ARB or TJM and asking them to help you could try some of the metal fabricating companies around the area, the only problem is there are just so many of them that they tend to specialise in different areas and often don't want to be bothered with fiddly small jobs - possibly anther post asking for metal fabricators in the Brisbane area (south side) would be a good idea, possibly post it up on a few forums.
I know there are several people on this forum that do just that type of work but to date I have not made use of them.
Peter - VK4FSD
Toyota 78 Series Troopy 4.2 TD Locked and loaded.
River City 4WD Club - President and Bulletin editor
Top
Posts: 632
Joined: Wed Sep 07, 2005 8:59 pm
Location: South Gippsland

Post by hiluxmad »

my money says TJM mine had the same mounting points the brackets are very basic
Keep it shiny side up!
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
Top
Posts: 77
Joined: Sun Feb 01, 2009 4:31 pm
Location: Brisbane Australia

Post by bugshifter »

TJM it was and they only want 300+ for the Brackets so i,m now looking for a Fabricator

Thanks to all for your help. :D :D :D
Your sister is hot but your mum does that thing with her tongue. :)
Top
Posts: 58
Joined: Mon Dec 07, 2009 9:56 pm
Location: Northern Territory

Post by blackarrowilly »

It looks like a TJM T13 bar.Have a look on there web site it should be on there.Hope that helps.
Top
Posts: 765
Joined: Fri Mar 12, 2010 7:28 pm
Location: Fixing something else the kids have broken

Post by BadMav »

Surely the wreckers would still have the actual vehicle it came off? Best bet that that's where the brackets are. Might be worth asking if it is.
Don't take life too seriously...it isn't permanent.
Top
Posts: 77
Joined: Sun Feb 01, 2009 4:31 pm
Location: Brisbane Australia

Post by bugshifter »

Wreckers were not interested and just said a flat no they were not there.
So anyway moving right along I'm getting some brackets made up tomorrow so all good in the end.
Oh and TJM have no old stock and do all the Fab work offshore since the warehouse fire last year so they told me.
Thanks again for all the replys
Your sister is hot but your mum does that thing with her tongue. :)
Top
Posts: 3224
Joined: Thu Apr 15, 2004 9:36 pm
Location: Lost in the Cleland fog!

Post by ferrit »

If its an ARB, it will have a welded on plate under the passenger wing stamped with the manufacturing model, date, and vehicles it suits- both my ARB winch bar and sidesteps and rear steps have these.

Plus ARB mounts are solidly welded in as part of the bar and not a bolt on affair!
2005 HDJ100 Manual, ARB bar, XD9000 winch, ARB rooftop tent + awning, Drawers, Engel, 2" OME lift, 285/75R16 KM2's, iCom, HID XGT's.
Top
Posts: 77
Joined: Sun Feb 01, 2009 4:31 pm
Location: Brisbane Australia

Post by bugshifter »

It's a TJM bar we have found. Cheers for your input. ............. All sorted now thanks
Your sister is hot but your mum does that thing with her tongue. :)
Top
Posts: 1
Joined: Mon Apr 11, 2011 10:00 pm

Re: Need help with identification of Bullbar

Post by zagg »

hey people thanks for the great stuff..!! It was really very interesting.

regards,
Web Design Brisbane
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 7 guests