GU patrol manual geashifters, differences?short shifter?

Post by **exquisit** » Wed Sep 23, 2009 1:08 pm

hi there guys

just wondering if there is a difference in the GU patrol shifters within the different models, etc

does anyone also make a short shifter for them?

thanks for any help

Post by **Auto-Craft** » Wed Sep 23, 2009 1:14 pm

Short shifter pretty easy,

alloy block, tig weld extended pin on the stick.

Dont go any more than 14mm though, or you will keep catching the synchro's when it tries to shift.

Post by **exquisit** » Wed Sep 23, 2009 3:29 pm

thanks Assassin_Offroad
do you have a step by step guide?
or even a picture of a short shifted gear stick?

thanks!
=)

Post by **Auto-Craft** » Wed Sep 23, 2009 4:47 pm

alloy block machined to space lid of shifter up 14mm

cut ball off gear stick and weld on another one from another stick to make it 14mm longer with tig.

Once you look at it, the above will make sense.

Post by **unlimited 1** » Thu Sep 24, 2009 6:13 pm

You could give Bryan fom unlimitedindustries.com.au a try. His design is far better than the above idea. He has manufactured a complete bolt on replacement so when you change vehicles you can take the shifter with you.

Post by **exquisit** » Thu Sep 24, 2009 9:40 pm

thanks for all the advice

unlimited1 can you pm me bryans number as the site does not have any phone numbers
thanks!

Post by **exquisit** » Thu Sep 24, 2009 9:45 pm

disregard that last post... found a number... i'll give it a go tommorrow

Post by **Jimmu** » Tue Mar 30, 2010 4:45 pm

Just what I have been looking for!

left a message for him.

Jimmy

Outer Limits 4x4 Board

GU patrol manual geashifters, differences?short shifter?

GU patrol manual geashifters, differences?short shifter?

Who is online