Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

4.6 rear centre, is it GQ or other nissan rear

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 382
Joined: Thu Jun 02, 2005 9:43 pm
Location: laying on your couch

4.6 rear centre, is it GQ or other nissan rear

Post by gqpete »

i have a rear nissan complette centre. was told it is GQ but when i put it next to my other one the teeth on crown and pinion look smaller.
to check i dropped it into a rear GQ housing and it fits normal, GQ axles both fit normal, BUT the teeth are different than a normal GQ crown and pinion.
it has M51:11 on it so that tells me 4:636.
the question is why are the teeth on the crown and pinion smaller?
lick my vinegary balls.
veeeeryniiiice
Top
Posts: 644
Joined: Wed Sep 01, 2004 3:11 pm
Location: N.S.W

Post by tuf045 »

does the tailshaft flange look the same? maybe out of the rear of a pathfinder? but i thought they were 4.88?
Reptile fabrication.
www.agroautomotive.net
Top
Posts: 382
Joined: Thu Jun 02, 2005 9:43 pm
Location: laying on your couch

Post by gqpete »

didn't check flange actualy.
but does a pathfinder rear bolt straight in to a GQ rear and take GQ axles aswell?
lick my vinegary balls.
veeeeryniiiice
Top
Posts: 358
Joined: Mon Apr 16, 2007 10:35 pm
Location: Brisbane QLD

Post by [gubeaut] »

I am pretty sure the 4.66 come out of a 2.8L patrol I have them in a gu ute. could be wrong
4INCH EFS LIFT
SUPRERIOR ARMS
TWIN LOCKERS
11000LB tigerz11 WINCH
36 swampers OFF ROAD
3inch S/S/S exhaust
Top
Posts: 2388
Joined: Sun Nov 24, 2002 10:20 pm
Location: bacabugari

Contact:
Contact big red

Re: 4.6 rear centre, is it GQ or other nissan rear

Post by big red »

gqpete wrote:i have a rear nissan complette centre. was told it is GQ but when i put it next to my other one the teeth on crown and pinion look smaller.
to check i dropped it into a rear GQ housing and it fits normal, GQ axles both fit normal, BUT the teeth are different than a normal GQ crown and pinion.
it has M51:11 on it so that tells me 4:636.
the question is why are the teeth on the crown and pinion smaller?
thats a 4.636 Navara Diff, 51 tooth crownwheel and 11 tooth pinion ... bolts straight in to my GU as i am running one until i get around to getting my 37 tooth crownwheel and 8 tooth pinion 4.625 GQ difflock fixed.

i don't notice any problems with the slight difference in ratios.

not sure which one is stronger ???
[url=http://bigred.redbubble.com/][color=red][b]You can follow me but its gunna hurt ![/b][/color][/url]
event pics http://bigred.redbubble.com/
Top
Posts: 15
Joined: Sat May 23, 2009 8:13 pm
Location: Perth

Post by flat out off road racing »

I have 4.6's in my petrol gq Patrol ute. They came out of a diesel 97 2.8 patrol. We had to swap the flanges on the driveshafts (from the petrol ute which had 4.1's) to get it all mated up correctly
Top
Posts: 345
Joined: Wed Dec 24, 2008 11:58 am
Location: Mackay

Post by tye1986 »

hey mate devide the number of pinion teeth by the number of crown wheel teeth this will tell you your ratio.
gq coil cab with stuff
Top
Posts: 382
Joined: Thu Jun 02, 2005 9:43 pm
Location: laying on your couch

Post by gqpete »

tye1986 wrote:hey mate devide the number of pinion teeth by the number of crown wheel teeth this will tell you your ratio.
i know what the ratio is. the teeth are smaller and the reference to the navara diff makes sense. i'm tipping the patrol one is stronger but am very suprised that the navara diff bolts straight in and axles fit aswell.
lick my vinegary balls.
veeeeryniiiice
Top
Posts: 1060
Joined: Mon Feb 14, 2005 8:05 pm
Location: Kilsyth, Victoria

Post by hokey »

unfortunately i'm the one who sold pete thse centres. i was told they were patrol fronts and didn't have any reason to check.

so are these things of any use to anyone? from what i've read it'll fit the REAR?? of a gq/gu and will just need the taishaft flange changed to bolt up?

other thing is does anyone know how weak these things are? would the be fine for some decent offroading witha stock motor and good tyres (ie no comps)??

cheers
Top
Posts: 286
Joined: Tue May 11, 2004 8:48 pm
Location: Toowoomba

Post by patrol man »

51/11 in a H233b is from a R50 Pathfinder. smaller front flange same as the 2.8 and 33 spline axles.
I didn't think the Navara ran a H233b diff in the rear
Nissan had a run of these been noisey and lots were replaced under warranty.
For most this didn't fix there problem, and down the track a repair kit was made available which composed of weights added to the trailing arms and the sway bar links. this drastically change the way the noise amplified up to the body effectively removing the horrid diff noise.

I have a few 51/11's here and have had no luck selling them in the past. (fronts are not available to match these, but there pretty close to 37/8's)

I have one fitted to a patrol drum rear and am working on fitted a set to a patrol front diff for a buggy project. (low pinion front with MQ knuckles). Mainly just playing with junk that I have lying around.

I don't think they would be as strong but could be used to get you out of trouble, and I haven't heard of any braking.
Top
Posts: 1060
Joined: Mon Feb 14, 2005 8:05 pm
Location: Kilsyth, Victoria

Post by hokey »

yay. thats really annoying then isn't it...
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

interesting info. will have to keep my eyes out for this in future
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 166
Joined: Mon Jan 07, 2008 9:34 pm
Location: Maitland

Post by dave_str »

VG30E/VG33E and QD32 powered D22's ran the H233B rear diff.

As stated the R50 Pathfinder did aswell.

Dave.
2006 STR Navara with lots of goodies, just need a V6 front diff and a locker.
Top
Posts: 312
Joined: Sat Feb 08, 2003 12:49 pm
Location: Esperance WA, currently travelling around OZ

Post by GQ Toy »

dave_str wrote:VG30E/VG33E and QD32 powered D22's ran the H233B rear diff.

As stated the R50 Pathfinder did aswell.

Dave.
What he said, I used as navara rear diff to put an lsd centre in the front of my gu
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 57 guests