Got the shakes in my 105 series at the moment. Just had a rotation and wheel balance to try to fix the problem, but no good, still there. Feel it real bad around the 100 mark on the highway. Checked uni's and tailshafts, But they look good. Found no play in the panhard rod.
I think its time to check the swivel hubs - wheel bearings or kinpin bearings.
What are other peoples thought??
Aslo have the disconnect in the front drive as well.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
105 series shakes
Moderators: toaddog, Elmo, DUDELUX
105 series shakes
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Yeh the tyre guy said they where slightly old of round, but had them rotated front to back still with the same feel. Got it booked in to get the front end looked at. Haven't got time at the moment to do it myself.
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Banned
Who is online
Users browsing this forum: No registered users and 102 guests