Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
1 x hzj105r 1hz cruiser with a stuffed fuel cut solenoid (the anti theft one that requires the pump removed and dismantled) I am looking to have the pump rebuilt while it's out and I am half way through sourcing all the bits i need for a turbo install.
I need to know if I can have the boost compensator installed in the pump while it's apart, and still drive normally without the turbo while I am finishing that part off?
Please don't tell me not to bother with the boost compensator in my turbo system, I have already decided to go with one.
i don't know the fuel pump they have but generally it should be fine. the boost comp just won't do anything until you put the turbo on. won't change non-turbo performance in any way.
It will work. But let whoever is doing it know before hand. Transfer pressures and advance settings alter when more fuel is delivered under boost. Transfer pressure settings may have to be reset on the vehicle if the man has the right tools.
Andy
www.diesel-tec.com.au Ph 03 9739 5031
Ball bearing turbo upgrades for factory turbo vehicles. Got a diesel question just ask.
Home of the twin turbo shorty and many 150rwkw+ patrols.
(the anti theft one that requires the pump removed and dismantled) I am looking to have the pump rebuilt while it's out and I am half way through sourcing all the bits i need for a turbo install. 