Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Oil temp @ 120deg!

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 105
Joined: Sun Sep 13, 2009 8:39 pm
Location: Brisbane

Oil temp @ 120deg!

Post by turbmav »

Got a turbo TB42 on gas and took it on Bribe Island today(fully sick 4 wheel drifting) and the oil temp got up to 120 odd degrees, is this dangerously hot or not. When does oil break down and degrade.Have a oil cooler but might not be big enough for beach action as it usually sits at 100 deg on highway.
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Re: Oil temp @ 120deg!

Post by -Scott- »

turbmav wrote:Got a turbo TB42 on gas and took it on Bribe Island today(fully sick 4 wheel drifting) and the oil temp got up to 120 odd degrees, is this dangerously hot or not. When does oil break down and degrade.Have a oil cooler but might not be big enough for beach action as it usually sits at 100 deg on highway.
Decent oil will work OK above 120 degrees. Track cars will see 130 degrees regularly. Only issue would be oil weight. Probably good to use something towards the upper end of the recommended viscosity range, rather than the lower end.
Posts: 105
Joined: Sun Sep 13, 2009 8:39 pm
Location: Brisbane

Post by turbmav »

Oil is Penrite 20-50 gas stuff, so it is on the uper side of oil break down area yeh?
Posts: 22
Joined: Thu Jan 12, 2006 11:12 am
Location: Brisbane

Post by scratchedsafari »

my track car never sees 130deg. 120 is generally regarded as the absolute limit amongst racers. You want a high quality full synthetic if you are hitting those temps.

If that Penrite 20-50 Gas is not a fully synthetic, I would be changing it.
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

Fair enough.

I checked back over some figures. It was only one bloke who sees 130+ on the track quite regularly, and my brother's LS2 hits 130 when he pushes it (on the road), but you're right - a quick google shows lots of people saying 120 Deg C / 250 Deg F as the maximum desirable. Above that, do something about it.
Posts: 646
Joined: Thu Sep 07, 2006 10:51 pm
Location: Central Coast NSW

j

Post by Clanky »

Sounds like you need a bigger oil cooler,
Yay more new toys!

:armsup:
Posts: 105
Joined: Sun Sep 13, 2009 8:39 pm
Location: Brisbane

Post by turbmav »

Great! just what I need, more radiator's and coils stuffed in the front grill. Might just stick it on the bonnet next to my pod. Just kidding.
Posts: 646
Joined: Thu Sep 07, 2006 10:51 pm
Location: Central Coast NSW

f

Post by Clanky »

I know what you mean about the lack of space.
I have to fit a powersteer cooler and oil cooler in too, but the big fat front mount intercooler is taking up the best real estate. Might have to put an airscoop/fan arrangement and stuff it in somewhere else

Maybe the on top of the bonnet is not a bad idea!!
Posts: 105
Joined: Sun Sep 13, 2009 8:39 pm
Location: Brisbane

Post by turbmav »

Been talking to a few guys about this and they said if the coolant is over 100 degs the oil temp wouldn't be any different. Makes sense I thought.
Posts: 145
Joined: Wed Jun 29, 2005 5:52 pm
Location: Newcastle

Post by smithie »

I would be less concerned about the stability of the oil and more concerned about the effect of high temperature on the seals in the transmission.
Max temp for oil seals vary depending on material type but is likely to be 120degC (Nitrile / Buna-N).
Short temperature spikes shouldn't be too problematic but extended periods of 120degC+ temperatures could lead to seal failure.

I'd upgrade the oil cooler.
1HD-FT SWB 70 Series
Posts: 511
Joined: Tue Jan 15, 2008 1:33 pm
Location: Cooma NSW

Post by date »

Are you sure of the calibration of your oil temp gauge? Temps of that order would scare me to death. What does the temp gauge show when you leave the vehicle overnight ie when the oil is at ambient temperature?
Posts: 105
Joined: Sun Sep 13, 2009 8:39 pm
Location: Brisbane

Post by turbmav »

Oil gauge reads 50c to 150c it sits below 50 on start up for about 5-10mins it seems accuate. Smithie, the engine is starting to leak a bit more oil now. I dont know if it's from heat or age as the motor was sitting for a while unused. Has anyone got a oil temp gauge on a standard TB42?
Post Reply

Who is online

Users browsing this forum: No registered users and 118 guests