anyone done a sas delica just curious or v8 conversion?
cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
sas delica??
Moderator: -Scott-
Check out this Deli V8, it is running a supercharged 1UZ-FE with the Toyota auto, if you look in "Johny got a new motor" on "4 z bch's" photobucket account you can see a heap more pictures. http://s767.photobucket.com/home/4_Z_BCH/index
Also if you join Delica club forum (needed because I don't think you can access the forum otherwise) check out these links
"New Boots 4 My V8 Delica" (Rather wide tyres) http://www.delicaclub.com/viewtopic.php?t=21770
"It's Alive!!" http://www.delicaclub.com/viewtopic.php?t=21483
I think they are good threads about his Deli.
There is a video and actual pictures of his install, if I can upload pictures here I will, I hate photobucket, to many links get lost etc.
I am hoping to fit a 4in body lift, 33's, engine and gearbox only spaced down 2" and basically a stock VVT 1UZ or 3UZ using the 5 speed auto due to its lower first gear and similar top gear ratio the Deli's autos have.
"4 z bch" did a 2" body lift to allow the engine to clear the firewall, if you know about Delica V6's (which I own) he has ended up with more room and easier to work on, I am a mechanic and a Delica is far from the worse vehicle to work on, by van standards they are one of the better ones.
Last edited by Sand plough on Mon Apr 19, 2010 6:58 am, edited 1 time in total.
Who is online
Users browsing this forum: No registered users and 3 guests