Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Hey all, sofar ive found out its a 41mm nut.. but i need the thread size for the nut on the harmonic balancer on a TD42 motor as mine's gone M.I.A
Trying to avoid buying it thru nissan and wreckers only seem to have a bolt on type instead of the big nut that mines got
So im hoping someone somewhere has one pulled apart that can tell me the thread size on the end of the crank so i can go to boltmaster or somewhere similar and buy a nut
Just a question, you do have the tapered ring which sits behind the nut too dont you? Just thinking if your nut went missing maybe the ring did too!
Oh another thing - the TD42T engine has a different size nut too.
hehe yeah i got the tapered ring.. lucky tho as it was loose but i got it before it all made a big mess of everything lol.. will give patrolapart a buzz tomorrow and see how i go thanks for ya help
could have got it thru nissan by now but i keep forgetting to order it lol
Send Garry an email at Nizzbits nizzbits@hotmail.com
He is really helpful and sells Nissan genuine parts - I get all my parts from him and the prices an post are pretty good compared to the dealers
