does anybody know if the mount of the control box in the engine bay affect the wireless remote? also is it advicable to extend the wires from the winch to the control box?
cheers anthony
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
tigerz11 control box
Moderators: toaddog, TWISTY, V8Patrol, Moderators
tigerz11 control box
IF YOU OVER TAKE ME I WILL FOLLOW YOU HOME AND S*#T IN YOUR SLIPPERS
Haven't seen one yet but I assume it's one of the new sealed solid state solenoid packs ?
If it is, there's no point in moving it into the engine bay as it's pretty much waterproof anyway.
Also by relocating it you'll have to use larger cable than what is fitted to handle the current draw over the longer distance.
If it is, there's no point in moving it into the engine bay as it's pretty much waterproof anyway.
Also by relocating it you'll have to use larger cable than what is fitted to handle the current draw over the longer distance.
Resident Terrorist
Wireless remote works fine in mine mounted under the bonnet. I tested it at 150m away at it was still working. I can't see you needing to operate it at that distance though. It comes with pretty long cables so I didn't have to extend mine. It's mounted just near the radiator though so if you wanted to mount it closer to the firewall you might have to look at extending/upgrading wires.
Who is online
Users browsing this forum: No registered users and 1 guest