Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

VP diff in 4runner???

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 396
Joined: Tue May 12, 2009 3:03 pm
Location: Sunshine coast

VP diff in 4runner???

Post by Middo »

my mates got a 93 VP comodore rear diff that has like a detroit locker or a lock rite sortov thing in it so it's all the time locked my question is can i put this in my 91 4runner with not alot of trouble. cheers.
4x4 tool kit: Duct tape and a BFH . If it moves and it shouldn't, use the tape, if it doesn't move and it should, use the hammer.
Tim
Top
Posts: 1715
Joined: Tue Sep 06, 2005 8:38 pm
Location: at my wits end

Re: VP diff in 4runner???

Post by RED60 »

Middo wrote:my mates got a 93 VP comodore rear diff that has like a detroit locker or a lock rite sortov thing in it so it's all the time locked my question is can i put this in my 91 4runner with not alot of trouble. cheers.
Should fit easily using duct tape and a large hammer.... and that sortov locker.. is that from Russia.....
Show me the money..SHOW ME THE MONEY
Top
Posts: 396
Joined: Tue May 12, 2009 3:03 pm
Location: Sunshine coast

Post by Middo »

fair enough. was a simple question. anyone else with some real answers
4x4 tool kit: Duct tape and a BFH . If it moves and it shouldn't, use the tape, if it doesn't move and it should, use the hammer.
Tim
Top
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

Front or rear?
This is not legal advice.
Top
Posts: 3725
Joined: Wed Jun 30, 2004 1:45 pm
Location: Blue Mountains, or on a rig somewhere in bumf*ck idaho

Post by rockcrawler31 »

Are you talking about the entire diff housing or just the third member? Either way i reckon you'll be up for some decent fab work.

If it's the entire housing then at the very least you'll be looking at totally redoing the link mounts and any amount of other fab.
http://www.populationparty.org.au/
Top
Posts: 396
Joined: Tue May 12, 2009 3:03 pm
Location: Sunshine coast

Post by Middo »

its rear. and its the whole diff with housing all the way out to were it bolts on to the hub
4x4 tool kit: Duct tape and a BFH . If it moves and it shouldn't, use the tape, if it doesn't move and it should, use the hammer.
Tim
Top
Posts: 2877
Joined: Mon May 10, 2004 9:46 pm
Location: Goodna QLD

Post by ludacris »

Not worth it because it aint going to be strong enough to deal with offroading. What is its ratios. Do they match. Cost more to fit it up if you have to pay someone than to buy a $500 lockrite or a cig weld rear.

Cris
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
Top
Posts: 396
Joined: Tue May 12, 2009 3:03 pm
Location: Sunshine coast

Post by Middo »

ah mate told me the ratio. its a drag racing ratio. yeh i just thought id ask cause i had no idea. no big deal. im gunna get an airlocker eventualy for the back anyway
4x4 tool kit: Duct tape and a BFH . If it moves and it shouldn't, use the tape, if it doesn't move and it should, use the hammer.
Tim
Top
Posts: 309
Joined: Sun Apr 24, 2005 8:20 pm

Post by Thommo 73 »

i asked my wife and she said it would.
1uzed and no home for it
Top
Posts: 470
Joined: Wed Jan 24, 2007 12:21 pm
Location: Australia

Post by 351ciofgrunt »

I'd put it in the front, it might improve the turning circle :rofl:
Last edited by 351ciofgrunt on Wed Apr 07, 2010 7:47 am, edited 1 time in total.
GQ Patrol Wagon, 6 point roll cage
351 cleveland, CHI heads, solid cam, Funnelweb single plane, 750 HP DP
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

Ahh... a DRAG racing ratio :armsup:
Top
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

351ciofgrunt wrote:I'd put it in the front, it might improve the turning circle :rofl:
As long as you do a billycart steering conversion as well.
This is not legal advice.
Top
Posts: 3288
Joined: Sun Feb 02, 2003 10:15 pm
Location: Central West NSW

Contact:
Contact Slunnie

Post by Slunnie »

bazzle wrote:Ahh... a DRAG racing ratio :armsup:
Ahhhh the 3.08:1 diff! :lol:
Cheers
Slunnie

Discovery TD5, Landy IIa V8 ute.
Top
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

chimpboy wrote:
351ciofgrunt wrote:I'd put it in the front, it might improve the turning circle :rofl:
As long as you do a billycart steering conversion as well.
Yes but because it is on a 4WD you also need to do the twin stick side steer conversion as well, you may require a navi to steer one side when you go out but at least you will have company.
Top
Posts: 1325
Joined: Wed Jul 04, 2007 4:13 pm
Location: brisbane australia..logan reserve

Post by 11_evl »

Slunnie wrote:
bazzle wrote:Ahh... a DRAG racing ratio :armsup:
Ahhhh the 3.08:1 diff! :lol:
sure thats std.. he said drag racing ratio.
so it will be 3.55:1
michael
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

11_evl wrote:
Slunnie wrote:
bazzle wrote:Ahh... a DRAG racing ratio :armsup:
Ahhhh the 3.08:1 diff! :lol:
sure thats std.. he said drag racing ratio.
so it will be 3.55:1
If its still the stock VP housing its an 8.75" Borgwarner and could be anything from 4.1 through to 2.78 if the gears have been changed. But in any case it only has 28 spline axles and a very small pinion. I imagine it would be weaker than a hilux diff. Strong enough to run 9 second passes on a 28" tall tyre but not going to handle the torque a 4wd will put on it in low range.
Top
User avatar
DIRTY ROCK STAR
Im here for the sausage!
Posts: 15646
Joined: Wed Sep 24, 2003 7:11 pm
Location: NEWCASTLE

Post by DIRTY ROCK STAR »

champ our exchange rate is good.
if you cant afford an air locker, get online buy a lockright from the states.

i ran one for a while and no complaints it is what it is.

with conversions etc, if you have to ask about it then you dont have the skills to do it yourself, so just buy a lockright. my 2c.
EVERYONE LOVES A 40
www.lovells.com.au
RAW4x4
Top
Posts: 466
Joined: Sun Oct 11, 2009 5:53 pm
Location: Pakenham, Victoria

Post by HUSSLN »

my guess is its the red light warrior setup for the v6 hero's 4.11 mini spool. gears can be had from any r31 pintara and mini spools are 100 bux at any diff joint or ebay, P plater special.
Top
Posts: 396
Joined: Tue May 12, 2009 3:03 pm
Location: Sunshine coast

Post by Middo »

cheers for the proper answers ruff and rock star. was just a thought. wasnt to serious. will probably get a lockrite till i can afford an airlocker.
4x4 tool kit: Duct tape and a BFH . If it moves and it shouldn't, use the tape, if it doesn't move and it should, use the hammer.
Tim
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 14 guests