Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

v8 windsor conversion to gq

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 14
Joined: Mon Dec 08, 2008 8:28 pm
Location: bittern

v8 windsor conversion to gq

Post by GQPATR0L »

i am looking at putting a 302 windsor in my patrol dose any one know any one that has done this or knows if they make the kit.And dose any one know if the clevo has the same bolt pattern as the windsor thanks luke.
Top
Posts: 470
Joined: Wed Jan 24, 2007 12:21 pm
Location: Australia

Post by 351ciofgrunt »

Yes the clevo and windsor have the same bellhousing pattern.

Dellows have the conversion kit, I believe it is the only one available.
GQ Patrol Wagon, 6 point roll cage
351 cleveland, CHI heads, solid cam, Funnelweb single plane, 750 HP DP
Top
Posts: 103
Joined: Sat Dec 19, 2009 9:27 pm
Location: Ipswich

Post by tufftruckin »

talk to ludacris. he has a 302windsor in his gq winch challenge truck
An ounce of precaution is better than a ton of cure!
Top
Posts: 443
Joined: Tue Jan 04, 2005 10:08 pm
Location: sydney

Post by mattsluxtruck »

I have one in my Maverick as well.
Top
Posts: 4330
Joined: Tue Jun 08, 2004 6:06 pm
Location: Central Victoria

Contact:
Contact coxy321

Post by coxy321 »

Go for a S2 or S3 AU XR8 motor too - they have a few factory go-fast bits, or even better, find a 220kw unit or a T-series stroker.
Top
Posts: 470
Joined: Wed Jan 24, 2007 12:21 pm
Location: Australia

Post by 351ciofgrunt »

It's nice to see someone going with a ford, instead of a chev like all the sheep out there.
GQ Patrol Wagon, 6 point roll cage
351 cleveland, CHI heads, solid cam, Funnelweb single plane, 750 HP DP
Top
Posts: 2877
Joined: Mon May 10, 2004 9:46 pm
Location: Goodna QLD

Post by ludacris »

Nice to see another FORD conversion. :D

Cris
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
Top
Posts: 54
Joined: Mon Mar 01, 2010 2:00 pm
Location: Elimbah Qld

Post by v8maverick »

Ive just finished puting one in mine i used a dellow kit it was realy good
apart from the clutch slave didnt bolt up i had to drill the bellhouseing to move it back a bit. as for the fit i used a el xr8 engine and the power steering and a/c didn't fit they hit the chassis.i had to use a modified F150 p/s and a/c bracket. and clevo don't fit you have to flog the fire wall to clear the head. any other questions just ask mate.
matt
Top
Posts: 443
Joined: Tue Jan 04, 2005 10:08 pm
Location: sydney

Post by mattsluxtruck »

I had the same issue with the idler and the AC pump hitting chassis.
I just swapped mine back to the old style windsor front dress.
Top
Posts: 54
Joined: Mon Mar 01, 2010 2:00 pm
Location: Elimbah Qld

Post by v8maverick »

I thought about doing the swap back to a vee belt but wanted to keep the flat belt and i had already bought new water pump and idlers and alternater before i new it dadn't fit.hahaha stupid me should always dummy fit everything.
Top
Posts: 4330
Joined: Tue Jun 08, 2004 6:06 pm
Location: Central Victoria

Contact:
Contact coxy321

Post by coxy321 »

v8maverick wrote:I thought about doing the swap back to a vee belt but wanted to keep the flat belt and i had already bought new water pump and idlers and alternater before i new it dadn't fit.hahaha stupid me should always dummy fit everything.
Plus its a shitload easier to replace a micro-v (serpentine) belt if it snaps, and there's only one belt, not three.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest