Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Re-bracing brake line after backing plate removal mod.

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 235
Joined: Sat Apr 11, 2009 4:12 pm
Location: Heidelberg, Victoria

Contact:
Contact collins110

Re-bracing brake line after backing plate removal mod.

Post by collins110 »

just wondering how people made their new support brackets for the brake line since the original was on the backing plate. Pics would be helpful
Northside Fleet Services PTY. LTD.
243 Dundas Street Preston, Victora
(03)94840432
(For all your Gas and Mechanical needs)
Top
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Post by dogbreath_48 »

I now have rubber hose running from the axle directly to the caliper - makes getting the caliper out of the way (for hub service etc) much simpler.
Tetanus rolling on 37's
Top
Posts: 1109
Joined: Mon Feb 12, 2007 8:48 pm
Location: Australia

Post by hulsty »

Those off the shelf brake lines or you have some made up? Got the length of them?

I should do the same, whats the reason for removing the backing plate?
\
The Silver Bullet - BJ74
Where the actions at Ontrack 4wd Club
http://www.ontrack4wdclub.com/
[url]http://www.cams.com.au/[/url]
Top
Posts: 646
Joined: Thu Sep 07, 2006 10:51 pm
Location: Central Coast NSW

h

Post by Clanky »

If you are still using the backing plates you can drill out the rivets holding the brake fitting onto it, silver solder some nuts on the back and put bolts back in to hold the fitting back in place.
Top
Posts: 4990
Joined: Sun Oct 20, 2002 7:22 pm
Location: Qld, Hilux Country

Contact:
Contact bubs

Post by bubs »

hulsty wrote:Those off the shelf brake lines or you have some made up? Got the length of them?

I should do the same, whats the reason for removing the backing plate?
\
Quote I sell these, $190/pair inc postage for braided DOT approved lines for the front of a hilux / landcruiser. Screw directly into the caliper.

Only pic I have on this PC are from my old truck with rubber lines

Image

Buddy
http://www.budscustoms.com.au
Like us and follow on facebook for up to date information of what we are working on and great random specials!

Custom Parts & Fabrication!
Ph: 0417 708 598
Top
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

Post by Willy Hilux »

Zip tie to shock. It will keep it tight and out of the way.
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Top
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Post by dogbreath_48 »

hulsty wrote:Those off the shelf brake lines or you have some made up? Got the length of them?

I should do the same, whats the reason for removing the backing plate?
\
no I just had them made at the brake place on coolstore rd, across from iceman. I had the luxury of dropping off the entire axle and having them do new steel lines +fittings at the same time.
Tetanus rolling on 37's
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 0 guests